Question about Ford Cars & Trucks
i believe it is part of the wiper motor which should be located in the driver's side rear corner of the engine bay, on the firewall. Many 03 and up Fords use a "Smart motor" for the wipers which has the motor and a module in one piece.
here is a diagram
Posted on Oct 07, 2009
Yes it is. They will need to be drilled out. Thats the best way, some people try to put bolts on, but I dont advise it.
Posted on May 12, 2010
Yes they are easy to change, But they aren't cheap. I work on a lot of police cars and usually the light control module will have just one dead circuit in it, like no parking lights or no headlights. You can bypass the one circuit that is bad with a relay.
Posted on May 19, 2010
SOURCE: 2005 crown vic climate control
I can't say 100% on this but some vehicles still use vacuum to operate the blend air doors (electric solenoids or earlier cable to operate the tempature door).
You may have a vacuum issue and defrost would be the default position because you need your winshield clear more than heat on your face or feet.
Start at the intake manifold and follow your vacuum source.
Posted on Aug 24, 2011
Tips for a great answer:
Dec 19, 2015 | 1997 Ford Crown Victoria
May 31, 2015 | Cars & Trucks
Sep 11, 2014 | 2005 Ford Crown Victoria
Oct 17, 2011 | 1999 Ford Crown Victoria
Sep 13, 2011 | 2005 Ford Crown Victoria
Feb 20, 2011 | 2005 Ford Crown Victoria
Jan 31, 2010 | 2005 Ford Crown Victoria
Oct 07, 2009 | 2004 Ford Crown Victoria
Jul 11, 2009 | 2007 Ford Crown Victoria LX Sedan
21 people viewed this question
Usually answered in minutes!