wow , no engine options stated, or type of driveline.... wow.
this is covered in the FSM, read that.
it states
U1411-Implausible Fuel Volume Signal Received
that means to get the car fully scanned,
using a real scan tool that sees all 2006, jeep DTC errors.
including BCM codes.
the manual tells you what to do.
here is just small expert from the Factory.serv.manual
quote
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. (Refer to 9 - ENGINE - DIAGNOSIS AND TESTING)(Refer To List 1).
Theory of Operation
The BCM has to send the PCM a fuel volume signal over CAN C. The signal the BCM sends over CAN C is implausible.
Diagnostic Test
1. ACTIVE DTC
Ignition on, engine not running.
With a scan tool read DTCs.
Is the DTC active at this time?
Yes
No
Refer To List:
2. CAN C BUS DTCS ALSO ACTIVE
With a scan tool check for DTCs in the BCM.
Are any CAN C related DTCs active at this time?
Yes
- (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - DIAGNOSIS AND TESTING) for the appropriate diagnostic procedures.
- Perform BODY VERIFICATION TEST - VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES/FRONT CONTROL MODULE - DIAGNOSIS AND TESTING)
No
--------------------------------------------------------------------------------------------
that word CAN , means the vehicle network communications buss called CAN.
if the PCM can not TALK to the BCM. this can cause the
data to be wrong. and the
Implausible , data.
greek ,huh,
get it serviced by any ASE shop in town or if desperate JEEP.
p0088-00 dtc code.
×