Question about Kia Cars & Trucks
CHECk both reservoirs in the master . See if your getting pressure from the master
Posted on Sep 18, 2019
Brake rubber flex line could be collapsed,,or kinked,,,i suggest loosening of the line at the master cylinder distribution block (this will give you the ability of loosening off one line at a time,,and have some one push the brake pedal down,,if you see fluid at this point then you know it has to be the line or the caliper.
if you get no pressure from the distribution block then its the master cylinders fault
Posted on Jan 16, 2009
you need a special tool avalable at most parts stores. its a disc brake piston turning tool. you have to rotate piston clockwise while pushing in on piston. you can fabricate something that enguages the slots and push and turn till all the way in.make sure to note position of slots and put them in same place as was before or the pin on the pads wont enguage the slot
Posted on May 11, 2010
When bleeding brakes always start at the furthest point from the master cylinder. So start at the passenger's rear and then the next furthest point, the driver's rear, then passenger front and last driver's front. Hope this helps.
Posted on Sep 19, 2010
Tips for a great answer:
Aug 18, 2013 | 1993 Buick Park Avenue
Sep 03, 2011 | 1994 Audi 100
Jul 25, 2011 | Kia Optima Cars & Trucks
Apr 18, 2011 | 2007 Kia Sorento 4x4
Nov 28, 2010 | Kia Rio Cars & Trucks
Oct 23, 2010 | Volkswagen Polo Cars & Trucks
Aug 25, 2010 | 2007 Audi A3
Aug 16, 2010 | Kia Rio Cars & Trucks
Apr 20, 2010 | 2007 Kia Spectra5
Oct 11, 2008 | 2007 Hyundai Accent GS Hatchback
27 people viewed this question
Usually answered in minutes!