Question about Opel Astra

1 Answer

Hi i have a opel astra h 1.9 diesel ,i would like to know if the pressure plate bolts are tied clockwise or anticlockwise

Posted by Anonymous on

Ad

1 Answer

Jamal Kerton

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If you want to hack people on Roblox, then you must have knowledge of hacking the Roblox. If you don't have enough knowledge of hack then you can take it from several online websites. I would suggest you to go through Roblox Hack as here you can find best tips to hack the man on Roblox. This website will also help you to generates tickets to play Roblox games.

Posted on Sep 05, 2019

Ad

5 Related Answers

leethedeuce

Lee A.

  • 4472 Answers

SOURCE: clutch kit mazda drifter 2.5 diesel turbo d/cab 4 x 4 model 2002

http://www.clutchcityonline.com/mazda_b2500.htm
There you go, just click on your year and the clutch kit. You can always call your local auto store and ask them to price it for you.
Thanks,
Lee

Posted on Jun 20, 2008

Ad
GasparMacari

GasparMacari

  • 166 Answers

SOURCE: opel astra 1600 16v jerks at low revs when

sounds like the iac might be giving problems, check ur idle air control valve on the side of you throttle body if its working right, replace if not.

Posted on Jun 19, 2009

pugwash814

paul crocombe

  • 377 Answers

SOURCE: opel astra headlight adjustment

two screws on each headlight control the direction the headlights are aimed. One screw, usually at the top but sometimes below the headlight, adjusts the headlight up and down. The other screw, located to one side, controls the headlight from right to left. Turning the appropriate screw one direction or the other will change the direction the headlight points.
In order to aim your headlights you need to have a flat vertical surface you can aim your headlights at in front of a level surface on which to park the car. If your driveway is level your garage door is the perfect place to aim your headlights.
The tools you will need for this job are simple. Masking tape is used to mark where the headlights are to be aimed and a screwdriver is needed to adjust the headlights. A tape measure will be necessary to measure the distance of the vehicle to the surface you're using to check the aim and to measure the up and down distances from your marks

Posted on Nov 07, 2009

cj2176

Chris Jones

  • 520 Answers

SOURCE: explainations of warnings lights in opel astra 2002

This is there to let you know that the computer has a trouble code stored. Have the computer scanned and the problem corrected. Hope this helps. Good luck.

Posted on Dec 02, 2009

Testimonial: "thank you"

Anonymous

  • 1 Answer

SOURCE: opel astra c14se bad timing spark

may be the tendur it not gd and chek the valve

Posted on Apr 10, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can u help with the torque setting for opel astra 16v 2004 g engen main and bid end and top


mains renew bolts. stage 1 tighten 50nm stage2 tighten 45degrees stge3 tighten a further 15degrees. big ends renew bolts stage 1 tighten25nm stage2 tighten a further 30degrees use a torque wrench and then a angle gauge

Aug 24, 2017 | Opel Cars & Trucks

1 Answer

I have an opel astra g 1.6 and black smoke comes out and it smells of fuel .. i have went to different garages and i get told different stories .. what could be the issue here?


Injectors, fuel pressure regulator. Could be a carburetor if the cars old enough. Gas or diesel? They can do tests with a scanner to find the faulty injector or cylinder tests to point at which cylinder is lagging. Of course, you already know it is dumping to much fuel.

Jun 25, 2016 | Opel Cars & Trucks

1 Answer

Egine light flashes rev counter went haywire then stopped working opel astra 1.7 litre diesel 03


know more about toyota but try a speed sensor-trans related-good luck-I know no more about that vehicle-JT

Nov 04, 2014 | Opel Astra Cars & Trucks

1 Answer

Cannot locate alarm on 03 plate,1.9 jtd model,can't switch of


post the symptoms. "cant switch off what, exactly"?
the FSM covers the tests, ever heard of the FSM. (buy it at the dealer)
or alldata.com1.9JTD,
i get to decode JTD ,thanks for not posting maker , model
Is this a FIAT"? why must i guess.?
uniJet Turbo Diesel,
Some PSA Peugeot Citroen diesel engines are also rebadged JTD units.
Applications:

pick one, and state country?
some (most?) alarms vary by country (LAWS dictate that)

Jun 14, 2014 | Cars & Trucks

1 Answer

Torque settings opel astra 95 1.6 big end and main bearings


Opel astra 160ie 93 model, what's the big end torgue specs on bolts

Apr 05, 2014 | 1994 Opel Astra

2 Answers

I have a 1998 Holden Astra eng noEL20B24119 and want to know the Head bolt torque settings and sequence. The engine is the transition model with twin tappet cover seals. has the torx star headed bolts.


I cannot find a EL20B in my data,but all Astra listed had the same head sequence as shown:

10 6 2 3 7

9 5 1 4 8

the torque specs for the C20XE,C20NE,X20XEV were all
25nm(18lb/ft),-then 90 deg,-90deg,-90deg.
Z20LET were as above plus an additional 15deg.
Same data for smaller and larger engines(except a couple that were 45deg instead of 15)
Make sure that you replace the head bolts with new,they are torque to yield bolts that are designed to stretch to 'plastic' state,and should not be reused.
Put grease(graphite if you have it) under bolt heads and washers,oil the threads.
Usually the head sets come with the torque specs.
I hope this helps you.

Apr 02, 2011 | Honda Accord Cars & Trucks

1 Answer

Fitting a timming belt to an honda civic 1.6 vtec 51 plate how does the belt tension work


hi from uk having lined ip timing marks on cogs? fit c/belt anticlockwise from crank pully cog then making sure that belt ist taut on none tensioner side ? slacken and re tighten tensioner bolt then turn crankshaft anti clockwise sixturns anticlockwise till c/shaft andcam marks re aligne ? now slacken tensioner bolt again and gently turn engine back/anti cockwise three teeth only!on the camshaft cog having done this tighten the tensioner bolt 44Nm final check !turn engine anti clockwisetill timing marks re aligne then if all ok ? re assemble engine hope this helps good luck !

Mar 23, 2010 | 2001 Honda Civic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Opel Experts

gbob59

Level 3 Expert

3063 Answers

randymanfive

Level 3 Expert

501 Answers

Adam Truesdale

Level 3 Expert

634 Answers

Are you an Opel Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...