Question about Honda Odyssey

Open Question

Reset time on Honda Odyssey Absolute - Odyssey Honda Cars & Trucks

Posted by PETER MUIR on

Ad

3 Related Answers

doin12volt

Josh Crager

  • 233 Answers

SOURCE: 2005 honda odyssey ~ cannot remember how to reset the oil change

hold in the trip meter button on the dash before you turn on the key... keep the button pushed in, turn the key on, and wait until the light goes out( 10 sec or so)

Posted on Dec 18, 2008

Ad

Anonymous

  • 97 Answers

SOURCE: the timing belt diagram for a honda odyssey 96.

I find that Advance is very helpful on these ?

Posted on Dec 31, 2009

Testimonial: "thanks. "

Ad
markanic62

Mark Stiner

  • 261 Answers

SOURCE: I got 04 honda odyssey absolute that vivrates round about 80k can some one tell me what cores that

Tire balance

Posted on May 04, 2015

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset a3 light on 06 Honda odyssey?


Reset the Oil Maintenance Light on a 2005-2015 Honda Odyssey:
  1. Turn the ignition to position "On" without starting the engine.
  2. Press the Select/Reset button until it displays the "oil life percentage"
  3. Then, press and hold the knob until the oil life percentage begins to blink.
  4. Release the knob.

Aug 29, 2016 | 2006 Honda Odyssey

1 Answer

Dtc p1457,0107


P1457 HONDA - Evaporative Emissions Control System Leakage EVAP Canister Systemxicon.jpghttp://engine-codes.com/p1457_honda.htmlForum CodePossible causes- Missing Fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap There is a Honda factory service bulletin with information on how to diagnose the P1456 on the following Honda models:
1998 Honda Accord
1999 Honda Accord
2000 Honda Accord
1998-2000 Honda Accord
symptoms- Engine Light ON (or Service Engine Soon Warning Light)
- Possible a noticeable fuel odor caused by the release of fuel vaporsP1457 HONDA Description The evaporative emission (EVAP) control system stores fuel vapor from the fuel tank in the EVAP canister temporarily to prevent it from escaping to the atmosphere and to enable it to be drawn into the engine by intake manifold vacuum and burned. In addition, the onboard refueling vapor recovery system (ORVR) stores fuel vapor generated when refueling in the EVAP canister.

The EVAP control system leak detection method improves the accuracy and frequency of the detection by determining faulty components and vapor leakage for each part. The EVAP control system (from the purge valve to the fuel tank) is divided into two parts. One is the "EVAP Canister Side" (from the EVAP two way valve to the purge valve) and the other is the "Tank Side" (from the EVAP two way valve to the fuel tank). There is 0.04 inch leak detection and 0.02 inch leak detection. If the 0.04 inch leak detection results are OK, the 0.02 inch leak detection runs. The P1457 code is detected when the EVAP system has a very small leak.

P0107 HONDA - Manifold Absolute Pressure Sensor Circuit Low Voltagexicon.jpghttp://engine-codes.com/p0107_honda.htmlForum CodePossible causes- Manifold Absolute Pressure harness is open or shorted
- Manifold Absolute Pressure sensor poor electrical circuit connector
- Faulty Manifold Absolute Pressure sensor
- Faulty Engine Control Module (ECM) When is the code detected?An excessively low voltage from the sensor is sent to ECMSymptoms- Engine Light ON (or Service Engine Soon Warning Light)
- Engine rough idle
- Engine hesitation
P0107 HONDA Description The Manifold Absolute Pressure sensor provides instantaneous manifold pressure information to the engine's Engine Control Module. The data is used to calculate air density and determine the engine's air mass flow rate, which in turn determines the required fuel metering for optimum combustion. A fuel-injected engine may alternately use a Mass Air Flow sensor to detect the intake airflow. A typical configuration employs one or the other, but seldom both.


In some vehicles the absolute pressure sensor is built into ECM. HONDA Technical Service Bulletins for P0107 code1999 HONDA ODYSSEY Electrical System 2000 HONDA ODYSSEY Electrical System1998 HONDA ACCORD Electrical System 1999 HONDA ACCORD Electrical System 2000 HONDA ACCORD Electrical System 2001 HONDA ACCORD Electrical System 2002 HONDA ACCORD Electrical System 1996 HONDA CIVIC Electrical System 1997 HONDA CIVIC Electrical System 1998 HONDA CIVIC Electrical System

Jul 25, 2012 | Honda Civic Cars & Trucks

2 Answers

2000 honda odyssey, sputtering and pinging, hesitating, check engine light w/ tcs light.....???


The following is from the Honda Odyssey (1999-2004) Service Manual page 19-81:

"When the Malfunction Indicator Light (MIL or check engine light) and the Traction Control System (TCS) light are both on at the same time, you should troubleshoot the Programmed Fuel Injection (PGM-FI) system first."

"The TCS indicator will come on if one or more of the following components are faulty:
heated oxygen sensor, manifold absolute pressure sensor, crankshaft position sensor, engine coolant temp. sensor, throttle position sensor, top dead center sensor 1 or 2, intake air temp. sensor, exhaust gas recirculation, barometric pressure sensor, idle air control valve, VTEC pressure switch, knock sensor, fuel supply system, automatic transaxle, and misfire detection system of the PGM-FI system."

Most major auto parts stores have a code reader that will read out your diagnostic trouble codes or DTC's that are stored in the car's computer when the MIL comes on. They will do it for free. With these codes, you can narrow down what is wrong. This is good information to have if you are dealing with a mechanic or dealership. The terminal to hook up the code reader is under the driver's side dash about in line with your right shin.

Feb 01, 2011 | 2000 Honda Odyssey

1 Answer

2003 odyssey dtc codes 1129,0505


1129- map sensor and 0505 its your idle control, but the 1129 may be the cause of the 0505. I would say that you have a bad bad map-manifold absolute pressure sensor. Good luck and contact if you need more help. thanks for using FIX YA

Apr 01, 2010 | 2003 Honda Odyssey

1 Answer

Honda Odyssey EX-L radio not working. Had to jump van would'nt start. Need reset code.


go to the dealer with your registration , ownership papers and, vin# the dealer will reset it

Sep 05, 2009 | 2007 Honda Odyssey

2 Answers

What does a mapsensor do


measures absolute pressure in the intake but i would look more at an air flow meter or o2 sensor

Aug 26, 2009 | 1997 Honda Odyssey

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers

Vincent G
Vincent G

Level 3 Expert

2363 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...