Question about 2006 Infiniti FX35

Open Question

06 infiniti fx35 u1000 and u1001 communication codes it does have the icc/das system prndl does not light up on dash , 2 wheel drive. when I plug up trans connector no aommuniction with icc/adas

Posted by Mike Powers on

Ad

5 Related Answers

hiseyj

Jackson Hisey

  • 99 Answers

SOURCE: SETTING THE CLOCK

The analog clock has little buttons on the face to move the time forward or back. If your FX has NAVI hit the setting button then choose CLOCK. If it doesn't have NAVI hit the menu button and scroll down to the clock setting.

Posted on Nov 28, 2008

Ad

Anonymous

  • 82 Answers

SOURCE: 2006 CHEV TRUCK PRNDL DISPLAY BLANK

its in your cluster, most likely the gauge its self

Posted on Jan 28, 2009

Ad

adrian halligan

  • 1075 Answers

SOURCE: how do you replace the battery on a 2005 infiniti fx35

i need more information?

Posted on Feb 18, 2009

greg_margo

Greg Margossian

  • 1959 Answers

SOURCE: 02 ultima troble codes u1000

These 2 codes indicate a communications problem within the CAN (Controller Area Network). The CAN network malfunction per Chilton lists 3 possible causes:

  • CAN connector is damaged or is disconnected
  • CAN communication line is open, shorted to ground or to power
  • One of the modules is shorted and pulling the CAN voltage low
I hope this helps narrow down your problem. Best of luck to you.

Posted on May 09, 2009

Anonymous

  • 30 Answers

SOURCE: The warning lights " ! " is on on my Infiniti FX35.

Tire Pressure Monitor Systems if you have low air presure of air is not equal on all tire (2psi diference) this will come on or if you hade tire replace or wheels need to reset.

Posted on Jun 09, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006sentra 1.8 special Code u1000 just popped up and now trans feels like it will jump out of car.


read here for the code and solutions......
http://www.nissanmurano.org/forums/66-problems/13408-dtc-u1000-u1001-can-communication-line.html

Mar 09, 2018 | Cars & Trucks

1 Answer

I got an U1001 in my 2003 1.8 Nissan sentra. What is this, and how can I solve it.


The U1000 and U1001 mean that there is no communication between the engine control unit and another control units that are part of the CAN system (Controller Area Network) or that at some point there was no communication. Before do any repairs with the U1000 and U1001 codes, the factory recommend repairing any other problems in the car. What are the other codes that you had?Here's a link to the code. U1001 Nissan Invalid or Missing Data for Primary Id

Jun 30, 2017 | Nissan Cars & Trucks

1 Answer

I've got a 2001 Cadillac deville and it says it's lost the IRC ID and IRC data code. any idea how that happen?


When a malfunction such as an open fuse to a module occurs while modules are communicating, a DTC U1001-1254 Loss of 000 Communications is set current. When the modules stop communicating the current DTC U1001-1254 Loss of 000 Communications is cleared but the history DTC remains. When the modules begin to communicate again, the module with the open fuse will not be learned by the other modules so U1000 or U1255 is set current by the other modules. If the malfunction occurs when the modules are not communicating, only U1000 or U1255 is set. Radio quit working shows Code IRC U1000 please help

Dec 07, 2016 | 2001 Cadillac DeVille

1 Answer

What does code u1001 mean?


It's a communications problem between modules on the CANS system. U1000 is usually wiring/grounds, U1001 is usually a module. Any symptoms?

Aug 23, 2014 | 2002 Nissan Altima

1 Answer

U1000 2002 altima 2.5


Do you know about serial data networks ? C.A.N - controller area network . Do you know what U - codes are about ? Download 2002 Nissan Altima LAN System Section LAN PDF Manual 60 Pages

Download 2002 Nissan Altima Body Control System Section BCS PDF Manual 22...

Here are sections of factory repair manual . Read up on C.A.N . U 1000 an U1001 one of the modules is having a problem on the wiring for the C.A.N bus is . You can check at the DLC with a volt meter .

Download 2002 Nissan Altima Emission Control System Section EC PDF Manual...

CAN COMM CIRCUIT U1000 1000*6 - - × EC-137 CAN COMM CIRCUIT U1001 1001*6 - - × EC-137

Apr 03, 2017 | Nissan Altima Cars & Trucks

1 Answer

U1001 u1000 2002 Nissan Altima 2.5


Do a search for TPS Transmission positioning sensor

Mar 16, 2014 | Nissan Altima Cars & Trucks

1 Answer

Transmission


a truly horrible gearbox,seems the gearbox ecu has failed

Nov 14, 2017 | 2003 Nissan Murano

1 Answer

I need a wiring diagram for the IPC in a 2004 Cadillac Deville. Trying to troubleshoot a U0155 OBDII code. The symptom is that my climate control display only shows LED's intermittantly. All of the...


Do you know what U code's are for ? How did you pull this code ? There is no U0155 , U code's start at
Diagnostic Trouble Code (DTC) List
DTC
Diagnostic Procedure
Modules
U1000
DTC U1000 and U1255
Audio Amplifier, Cellular Telephone Module, DDM, DDSA, Digital Radio Receiver, DIM, EBCM, ESC, FPDM, HVAC Control Module - Auxiliary, IPC, IPM, LMDM, LRDM, MSM, PCM, Radio, Remote Playback Device CD Changer, RCDLR, RIM, RMDM, RRDM, SDM, Steering Column Module, Theft Deterrent Control Module, VCIM, Window Switch - Front Passenger w/armored car
U1016
DTC U1001-U1254
Audio Amplifier, Cellular Telephone Module, DDM, DDSA, Digital Radio Receiver, DIM, EBCM, ESC, FPDM, HVAC Control Module - Auxiliary, IPC , IPM, LMDM, LRDM, MSM, Radio, RCDLR, RIM, RRDM, RMDM, SDM, Steering Column Module, Theft Deterrent Control Module, VCIM, Window Switch - Front Passenger w/armored car
U1040
DTC U1001-U1254
IPC, PCM, SDM
U1056
DTC U1001-U1254
EBCM, PCM
U1064
DTC U1001-U1254
Audio Amplifier, Cellular Telephone Module, DDM, DDSA, Digital Radio Receiver, DIM, EBCM, ESC, FPDM, HVAC Control Module - Auxiliary, IPC, IPM, LMDM, LRDM, MSM, PCM, Radio, RCDLR, Remote Playback Device CD Changer, RIM, RMDM, RRDM, SDM, Steering Column Module, Theft Deterrent Control Module, VCIM, Window Switch - Front Passenger w/armored car
U1065
DTC U1001-U1254
DDM, DIM, ESC, FPDM, IPC, LMDM, LRDM, VCIM, HVAC Control Module - Auxiliary, PCM, Radio, RIM, RMDM, RRDM, VCIM
U1066
DTC U1001-U1254
DDM, FPDM, IPC, IPM, PCM
U1088
DTC U1001-U1254
IPC
U1096
DTC U1001-U1254
PCM, SDM
U1128
DTC U1001-U1254
Audio Amplifier, Cellular Telephone Module, Digital Radio Receiver, Remote Playback Device CD Changer, VCIM
U1129
DTC U1001-U1254
Radio
U1130
DTC U1001-U1254
Radio
U1137
DTC U1001-U1254
Radio
U1144
DTC U1001-U1254
IPC, Radio
U1151
DTC U1001-U1254
Radio
U1160
DTC U1001-U1254
IPC, RIM
U1161
DTC U1001-U1254
IPC, RIM
U1162
DTC U1001-U1254
IPC, RIM
U1163
DTC U1001-U1254
IPC, RIM
U1164
DTC U1001-U1254
DDM, Digital Radio Receiver, DIM, FPDM, IPC, LRDM, MSM, VCIM, Radio, RIM, RRDM, Steering Column Module
U1165
DTC U1001-U1254
DDM, FPDM, LRDM, RRDM
U1176
DTC U1001-U1254
IPC
U1192
DTC U1001-U1254
IPC, PCM
U1255
DTC U1000 and U1255
Audio Amplifier, Cellular Telephone Module, DDM, DDSA, Digital Radio Receiver, DIM, EBCM, ESC, FPDM, HVAC Control Module - Auxiliary, IPC, IPM, LMDM, LRDM, MSM, PCM, Radio, Remote Playback Device CD Changer, RCDLR, RIM, RMDM, RRDM, SDM, Steering Column Module, Theft Deterrent Control Module, VCIM, Window Switch - Front Passenger w/armored car
U1300
DTC U1300, U1301, or U1305
Audio Amplifier, Cellular Telephone Module, DDM, DDSA, Digital Radio Receiver, DIM, EBCM, ESC, FPDM, HVAC Control Module - Auxiliary, IPC, IPM, LMDM, LRDM, MSM, PCM, Radio, Remote Playback Device CD Changer, RCDLR, RIM, RMDM, RRDM, SDM, Steering Column Module, Theft Deterrent Control Module, VCIM, Window Switch - Front Passenger w/armored car
U1301
DTC U1300, U1301, or U1305
Audio Amplifier, Cellular Telephone Module, DDM, DDSA, Digital Radio Receiver, DIM, EBCM, ESC, FPDM, HVAC Control Module - Auxiliary, IPC, IPM, LMDM, LRDM, MSM, PCM, Radio, Remote Playback Device CD Changer, RCDLR, RIM, RMDM, RRDM, SDM, Steering Column Module, Theft Deterrent Control Module, VCIM, Window Switch - Front Passenger w/armored car
U1305
DTC U1300, U1301, or U1305
Audio Amplifier, Cellular Telephone Module, DDM, DDSA, Digital Radio Receiver, DIM, EBCM, ESC, FPDM, HVAC Control Module - Auxiliary, IPC, IPM, LMDM, LRDM, MSM, PCM, Radio, Remote Playback Device CD Changer, RCDLR, RIM, RMDM, RRDM, SDM, Steering Column Module, Theft Deterrent Control Module, VCIM, Window Switch - Front Passenger w/armored car

The data link connector (DLC) allows a scan tool to communicate with the class 2 serial data line. The serial data line is the means by which the microprocessor-controlled modules in the vehicle communicate with each other. Once the scan tool is connected to the class 2 serial data line through the DLC, the scan tool can be used to monitor each module for diagnostic purposes and to check for diagnostic trouble codes (DTCs). Class 2 serial data is transmitted on a single wire at an average of 10.4 kbps. This value is an average; class 2 uses a variable pulse width modulation to carry data and depending on the message it may operate faster or slower. The bus will float at a nominal 7 volts during normal operation. Each module can pull this lower during the transmission. The bus is not at battery positive voltage or ground potential during normal operation. When the ignition switch is in RUN, each module communicating on the class 2 serial data line sends a state of health (SOH) message every 2 seconds to ensure that the module is operating properly. When a module stops communicating on the class 2 serial data line, for example, if the module loses power or ground, the SOH message it normally sends on the data line every 2 seconds disappears. Other modules on the class 2 serial data line, which expect to receive that SOH message, detect its absence; those modules in turn set an internal DTC associated with the loss of SOH of the non-communicating module. The DTC is unique to the module which is not communicating; for example, when the inflatable restraint sensing and diagnostic module (SDM) SOH message disappears, several modules set DTC U1088. Note that a loss of serial data DTC does not normally represent a failure of the module that set it.

Your best bet ,take it to a qualified repair shop.

Jan 01, 2018 | 2004 Cadillac Deville

1 Answer

No start cranks ok .trouble shoot code shows u1000 and u1001


Those codes are can communication codes that help each system talk to each other. You may find that it needs a new crank sensor. The 2.5 liter engine had some issues with crank sensors.

Feb 02, 2010 | 2003 Nissan Altima

2 Answers

Engine codes


sometimes coming data,but the every error comunication,for the scannner
rpm up and down same the lightgauge,low high,codes u 1001 1000

Jan 15, 2009 | 2002 Nissan Altima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Infiniti Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6523 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...