Question about Mahindra Bolero
There are clips welded to the subframe where the lines cross over (and on the diff axle tubes as well), look for them and let them guide the install of the new lines, I know this info 1st hand, had a 79 Trans Am
Posted on Dec 01, 2008
SOURCE: brake system or booster
is your pedal hard to push? if so maybe booster. does your pedal slowly drop all the way to the floor? if so definately the master cylinder (leaks internally)
Posted on Apr 07, 2009
SOURCE: which direction do i have
Hi I have seen several scrap fan motors because one did not ask which way but just tried! You are clever by checking first
There are two ways I determine the correct way!
1) See whether there is a piece of the thread sticking out past tghe nut. See whether you can make our the threads/. The threads are slanted!
Turn the nut in the direction that will slide it along the threads in the direction that you want ot to exit!
Remember that the fan nut & direction was designed as a self tightening mechanism.
If you look at the shape of the blades, ou can figure out which way the motor have to turn to propell the wind in the correct direction. now imagine, you are holding the fan, and the bmotor is trying to turn the fan. See what way you have to oppose the motor's push. That way is tight! So turn the nut in the opposite direction.
Posted on Sep 04, 2011
Just out of curiosity is there trailer lights plugin installed if so the plugin could be creating a neg ground for your lights
Posted on Feb 19, 2012
Tips for a great answer:
Jan 26, 2016 | 2007 Mahindra Bolero NEF
Apr 29, 2015 | Mahindra Cars & Trucks
Nov 25, 2014 | Mahindra Cars & Trucks
Apr 07, 2014 | 2007 Mahindra Bolero NEF
Oct 29, 2013 | Cars & Trucks
Sep 27, 2012 | 2011 Mahindra Scorpio
Feb 19, 2012 | 2006 Mahindra Bolero Single
24 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: