I was trying to find what DTC code P1151 means for a 2005 Toyota Prius ?

VSC ABS and ! lights plus red (!) - Toyota Prius Forum ...

www.priusonline.com/...toyota-prius.../19804-vsc-abs-lights-plus-red.ht...

Jun 3, 2008 - 8 posts - ‎3 authors
If the accumulator fails, you will get a red brake warning light and the pump will now run continuosly until it burns out. ... hydraulic pressure to the brake system and "no"red warning lights. .... Fog Lights, PassGas, Toyota Prius General Discussion, 4, 10-13-2005 09:12 AM ... 11-13-2015 10:01 PM by Tim Lee.

Alarm with Brake Light, ABS, VSC and amber warning lights ' PriusChat

priuschat.com > ... > Gen 2 Prius Care, Maintenance and Troubleshooting

Jul 26, 2005 - Later that same day - I started getting an alarm - as soon... ... Gen 2 (2004-2009) Toyota Prius Forums > Gen 2 Prius Care, ... Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by NorthStar, Jul 26, 2005. ... I am getting the red BRAKE LIGHT, the amber waming symbol, ABS, and ... VSC, ABS, (!) and emergency brake light on
Feb 5, 2010
Brake, Brake warning, ABS, VSC appear
Oct 5, 2008
More results from priuschat.com

I have toyota prius i got code $7e8 engine code whats that means please

prius huh, one of the most complex cars made and you want
DIY diagnosis? ever work high voltage and currents?

if not get it fixed.
first connect a prius aware scan tool and see if there are more DTCs.
Trouble Code: p0a94
DC / DC Converter Performance
Trouble Code Conditions:
The monitor will run whenever the following DTC is not present: - Boost converter overvoltage (OVL) signal detection (circuit malfunction)
Possible Causes:

• * Inverter with converter assembly

this is high voltage system, and has killed mechanics fiddling it with out HV certifications.

toyota prius codes p3022 check engine light on

run the fault codes to find out the faulty sensors /solenoids / servos.

You need a scan tool or a code reader to do it but,if the problem still exists then the lights will come back on.You need to retreive the troubles codes from the computer to see what area of the engine that problem exists and go from there.

P3006 refers to cell 6 in you Hybrid Traction Battery. It will need to be replaced or rebuilt. The batteries don't last forever. Mine died around 109,000 miles. I rebuilt it myself with the help of youtube videos and a module from eBay.

Hmm, I'm not sure what a main chip is but, there is a few reasons for this problem.

1. ABS Sensors - there could be something wrong with a sensor and/or the wiring to them
2. The wheel bearing speed sensor in a wheel is bad or intermittent which then tells the computer that wheel is traveling at a faster or slower rate of speed then the rest which in then the computer turns the abs light on.

Now when your warning lights go on, the computer sets a DTC code which is the key to helping solve this problem. If you can get the DTC (Data Trouble Code) from the dealership or from someone who can scan your can, I can better assist you in figuring out what's wrong. Hope this helps.

your owners manual should show all of the symbols and what they mean.I tried to get one to look at it but no luck...they should be in the manual though