How do I reset the Change Oil Indicator where the odometer is located. 2006 Explorer

1.With the car turned OFF, locate and hold down the odometer reset stick on the instrument panel.
2.WITHOUT your foot on the brake, press the engine start button twice while holding down the odometer reset.
3.Now...Your odometer reading will show some dashes that begin to go away one at a time. When the go away you are finished and your next scheduled maintenance has been reset in your IS computer and will alert you again at that time. Hope this helps
Read more: How to reset your oil change light on a Lexus IS250 or IS350 ' eHow.com http://www.ehow.com/how_5210681_reset-oil-change-light-lexus.html#ixzz1ZDyReSum

If you do your own oil changes, this is a helpful tip to keep in mind. Typically, it is best to wait until your dealer maintenance service warranty expires, as an 'owner' reset could result in a missed oil change, particularly if the dealer checks the indicator it does not believe an oil change is due.

1. Locate the trip odometer button and depress and hold.
2. Insert the key into the ignition and partially turn into the first position.
3. Pay attention to the trip odometer to display the word 'RESET'.
4. Release the trip odometer button, then press & hold it again.
5. The 'RESET' message will flash.
6. Release the button, and then press & release again (once only)
7. The service interval is now reset to 10,000 miles

set the mileage when the odometer is showing. put the key to off position. press and hold the reset button then turn the key to on position, do not start. then continue holding the reset button until the reading stops to zero or blank. turn it off, that should reset the light indicator

Resetting the MINI Oil Indicator
If you do your own oil changes, this is a helpful tip to keep in mind. Typically, it is best to wait until your dealer maintenance service warranty expires, as an ‘owner’ reset could result in a missed oil change, particularly if the dealer checks the indicator it does not believe an oil change is due.

1. Locate the trip odometer button and depress and hold.
2. Insert the key into the ignition and partially turn into the first position.
3. Pay attention to the trip odometer to display the word ‘RESET’.
4. Release the trip odometer button, then press & hold it again.
5. The ‘RESET’ message will flash.
6. Release the button, and then press & release again (once only)
7. The service interval is now reset to 10,000 miles

If you have the owners manual it will tell you. need more in fo. Is it a change oil soon lit or is ther a multi reset switch by the odometer?

Ford Explorer, Mercury Mountaineer, 2002-06

To reset CHANGE OIL SOON/OIL CHANGE REQUIRED message on the Message Center, press the SET UP control to access the System Check mode. Press and release the RESET button to display “OIL LIFE % HOLD RESET NEW” is displayed. Press and hold the RESET button for 2 seconds until “IF NEW OIL HOLD RESET” is displayed. Press and hold RESET button until “OIL LIFE SET TO 100%” is displayed.

Ford Five Hundred, Freestyle, Mercury Montego 2005-06 Tap the ODO/TRIP button to toggle the display between the odometer and trip odometer. Tap on the ODOiTRIP button again to toggle the display between the trip odometer and OIL LIFE % display. Press and hold the ODO/IRIP button for 2 seconds or more to display OIL LIFE 100%. Your oil life in now reset.
Good luck and print this and keep it in the glove box. Keep me posted if you have any other questions

Ford Explorer, Mercury Mountaineer, 2002-06

To reset CHANGE OIL SOON/OIL CHANGE REQUIRED message on the Message Center, press the SET UP control to access the System Check mode. Press and release the RESET button to display “OIL LIFE % HOLD RESET NEW” is displayed. Press and hold the RESET button for 2 seconds until “IF NEW OIL HOLD RESET” is displayed. Press and hold RESET button until “OIL LIFE SET TO 100%” is displayed.

Ford Five Hundred, Freestyle, Mercury Montego 2005-06 Tap the ODO/TRIP button to toggle the display between the odometer and trip odometer. Tap on the ODOiTRIP button again to toggle the display between the trip odometer and OIL LIFE % display. Press and hold the ODO/IRIP button for 2 seconds or more to display OIL LIFE 100%. Your oil life in now reset.

can you scroll down to the mileage indicator for the oil change and re-set it again to zero miles on the oil change.....just an idea

1. Press and release the SETUP button until the message center displays PRESS RESET AT OIL CHANGE.
2. Press and release the RESET button until the message center displays HOLD RESET TO CONFIRM.
3. Press and hold the RESET button for 2 seconds and release to reset the oil life to 100%.

TURN IGN ON
PRESS THE TRIP BUTTON REPEATEDLY UNTIL OIL LIFE IS DISPLAYED WHERE YOUR MILEAGE DISPLAYS
IT WILL FLASH OIL LIFE THEN RESET HOLD BUTTON UNTIL YOU HEAR THREE CHIMES
SWITCH OFF IGN