At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
how much work is it to change the turn signal switch on the 1998 monte carlohow much work is it to change the turn signal switch on the 1998 monte carlo
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This is a common GM specific problem. Your turn signal switch contains an elaborate networking device that has to cancel brakelights while running a turn light. Often times the ground within the turn signal switch is lost causing your situation. After investigating such other possibilities as fuses and loose grounds it may become necessary to replace the turn signal switch. Thank you, Dana
The 3rd brake light working does reveal that the fuse is good, and the brake switch is good. Check the bulbs, sockets, and the wiring between the brake lights
Turn signal switch. With you foot on the brake have someone stand behind the car. Wiggle the turn signal lever and see if the the brake lights flicker.
It could be wiring, a bad ground, a defective plug to the tail-light, the tail-light itself, a loose fuse, or a dirty or faulty connection at the hazard switch. If it is the hazard switch you can try to actuate it (on and off) 6 to 12 times. This may help clean off the contacts and let the brake lights, return to normal.
There is only one brake light switch. There should be a wiring harness connector somwhere in the back of the car. Follow the wires from the tail lights until you get to this connector. Take it apart and clean the terminals and reassembl. If this does not do it, move further up the harness until you next connector, do the same thing.
I have the same problem,it's the switch inside the turn signal
assembly.Unfortunately the entire assembly switch and all has to be
replaced.
Hope this helps.
×