1998 Acura CL. Where is the a/c clutch relay located please?

SOURCE: Find oil filter in engine of acura CL

back side of block under intake if its a 2.2 or a 2.3 if its a 3.0 its on the passenger side of engine bay if you turn the wheel you will be looking at it

SOURCE: transmission dipstick location

Sorry, I'm just now getting it to you.  The dipstick is located on the passenger side of the car way down at the bottom.  It should have a yellow handle.  It's just to the right and down of the battery.  Let me know if you can't find it still and I will get you a picture somehow.

SOURCE: 1998 Acura CL Radio Code need...

You Would have to get in Contact with the dealer and ask them for the information with the same you provided here they can help if its just the code there should not be a charge but every dealer is different. If you feel you can also call acura main number @Acura Toll free: 800-382-2238. Fax: 310-783-3535. Website: www.acura.com. I hoped that helped.

Greg Bernett

• 2993 Answers
• Posted on Nov 03, 2009

SOURCE: how to locate the thermostat for a 1997 acura 2.2

Removal & Installation

1. Disconnect the negative battery cable.
   
2. Drain the cooling system into a suitable container.
   
3. Locate the thermostat housing by following the upper radiator hose to the engine.
   
4. Loosen the hose clamps then carefully detach the hose from the fitting.
   

1. Disconnect any sensors or switches that may interfere with the removal of the thermostat from the housing.
   

1. Unfasten the retainers, then remove the thermostat housing.
   

1. Remove the thermostat carefully noting how it's installed.
   
2. Clean the mating surfaces of the thermostat housing.
   

1. Install the new thermostat and gasket.
   

1. Install the thermostat housing, then tighten the bolts securely.
   
2. Connect the radiator hose and tighten the hose clamps securely.
   
3. Install any remaining components, then refill the cooling system.
   
4. Start and run the engine until it reaches normal operating temperature while checking for leaks.
   

Testimonial: "thank you very much on the solution, didn't take as long as i expected!"

SOURCE: how to install a clutch on acura CL

Plenty to mention. Best way is to get the Hanyes Repair manual-sold for around $20, with plenty of stuff in it. A few things:
Disconnect battery.
Take off starter-motor.
Remove brake calipers, and tie them to struts.
Remove front tires.
Disconnect clutch master-cylinder
Jack up the car and support it on jack-stands.
Unbolt the clutch-housing from the engine, drag it out.
Installation is reverse of removal.

Testimonial: "Thanks! This should help"