Question about 1996 Dodge Ram 1500 Club Cab

1 Answer

How to remove rear seat in 1996 dodge ram 1500

Posted by Anonymous on

  • Lawrence Palmore
    Lawrence Palmore Oct 21, 2016

    Rear seat will not go into stoe passion! Stuck down. How do I vet rear seat out for good?!

×

Ad

1 Answer

ZJ Limited

ZJ Limited

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points
    Superstar:

    An expert that got 20 achievements.
    All-Star:

    An expert that got 10 achievements.
    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 17,970 Answers

REMOVAL & INSTALLATION

  1. Clamp the seat belts to keep them from retracting.
  2. Locate and disconnect seat wiring at the connector(s).
  3. Move front seats forward or back for access to the hold down hardware.
  4. Put the rear seats in the stowed position.
  5. On Durango 3rd row seats, lift the cushion upward and forward to floor cargo position.
  6. Remove the hardware securing the seat.
  7. On split bench models, lift the center seat upward to clear attachment stud
  8. Remove the seat from the vehicle.
NOTE Do NOT activate the track adjusters once the fastening hardware is removed.
  1. Installation is the reverse of removal.

how to remove rear seat in 1996 dodge ram 1500 - 336abe0.gif


Fig. Disconnect the wiring from under the seat



Fig. Seat trackhow to remove rear seat in 1996 dodge ram 1500 - d95c538.gifardware locations-typical


d95c538.gif




Fig. Split benchhow to remove rear seat in 1996 dodge ram 1500 - 851105e.gifbly-Ram


616f086.gif

Fig. Bucket seat mounting components-Durango shown


851105e.gif

Fig. Rear seat removal/installation


I hope help you with this; good luck (rated this help).

Posted on Aug 31, 2009

Testimonial: "Daigrams were exactly what I was looking for....THANKS!"

Ad

5 Related Answers

Anonymous

  • 5 Answers

SOURCE: 1996 dodge ram 1500 4x4

toasted fuel pump from running ti dry

Posted on Nov 13, 2008

Ad
emissionwiz

Marvin

  • 85239 Answers

SOURCE: 1997 Dodge Ram 1500 transmission will a 1996 interchange

No, the frame is different.

Posted on Nov 30, 2008

motor1258

Mike Butler

  • 6674 Answers

SOURCE: Location of O2 Sensors on 1996 Dodge Ram 1500 ?

Follow your exhaust manifold down from engine to exhaust pipes etc, you should see them sticking out, 3"-4" approx.length, with wires coming from them. Some are right on manifold, some further down on exhaust pipes.

Posted on Apr 15, 2009

Anonymous

  • 72 Answers

SOURCE: Front seat in 1996 Dodge Ram Pickup won't slide forward or back

1.Make sure the stiff wire that crosses under the seat to the passenger side latch hasn't come off. 2.Soak the slides with some good penatrating oil (NOT WD40!).

Posted on May 30, 2009

Anonymous

  • 10 Answers

SOURCE: How to tighten side mirror. 1996 dodge ram 1500 manual mirrors

take door pannal off there should be 3 bolts in the inside of the door where mirror sits unless its the reflection peace where you have to just get a new mirror

Posted on Jul 19, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 dodge ram 1500 5.2L no brake lights or turn signals. fuses are good. also the 3rd brake light works fine along with the running lights just no brake lights or turn signals in the rear
just an idea but if you have a trailer connection confirm that your grounds are all ok~!!

Feb 17, 2011 | 1996 Dodge Ram 1500 Club Cab

1 Answer

How do I remove the rear sliding window on 1996 dodge 1500
the frame is not differnt on the 1996 to 1997 they are intercangeable i just put a trans from a 1999 durango in my 1500 matched up great except the shift linkage is differnt but if you keep your old linkage you will be fine

Jul 17, 2010 | 2004 Dodge Ram 1500

1 Answer

Firing order diagram for 96 dodge ramp 1500 van v6 3.8 engine
Note this information, about Dodge RAM 1500 have 3.9 engine... 1996 Dodge 1500 Pickup 3.9 liter V-6 VIN "X"

efc6804.gif


This is for one 3.8L V6 1996 Dodge 3.8 liter V-6 VIN "L"

fa41457.gif


Hope helps (remember rated this).

Jul 04, 2010 | 1996 Dodge Ram 1500 Club Cab

1 Answer

1996 Dodge Ram 1500 2wd 318/ci
Use the balljoint removal tool to remove. Sometimes a bottle jack comes in handy for the stuck ones. When you put them back on, use a big C-Clamp

You can go to autozone.com and register for full free online repair manual for any vehicle if you ever need it.

Dec 13, 2009 | 1996 Dodge Ram 1500 Club Cab

1 Answer

I need a diagram of the rear brake drum assembly for a 96 dodge ram 1500
i need a diagram drum brake assembly for a 1998 dodge ram 1500 pickup

Sep 26, 2009 | 1996 Dodge Ram

1 Answer

Can i remove the alarm in my truck ? 1996 dodge ram 1500 4x4
what alarm? factory or aftermarket doesn't matter, either will require experience and know how...sorry.

Jun 25, 2009 | 1996 Dodge Ram 1500 Club Cab

1 Answer

Front seat in 1996 Dodge Ram Pickup won't slide forward or back
1.Make sure the stiff wire that crosses under the seat to the passenger side latch hasn't come off. 2.Soak the slides with some good penatrating oil (NOT WD40!).

May 30, 2009 | 1996 Dodge Ram 1500 Club Cab

1 Answer

Does a dodge ram 1500 have a cam or crank censor?
The 3.9L 5.2L and 5.9L engine use the distributor assembly as your cam sensor . The crank sensor is on right rear attached to engine block (behind cylinder head)

May 08, 2009 | 1996 Dodge Ram 1500 Club Cab

1 Answer

Rear door power lock--1996 Dodge Ram van (Roadtrek)-- won't open
Check all of your dash fuses inside the glove box if these are fine. Remove the door panel nd check to see that the wires have not come loose they tendto come loose from closing the rear door.

Mar 13, 2009 | 1996 Dodge Ram 1500 Club Cab

1 Answer

1997 Dodge Ram 1500 transmission will a 1996 interchange
No, the frame is different.

Nov 30, 2008 | 1997 Dodge Ram 1500 Club Cab

Not finding what you are looking for?

View Most Popular

1996 Ram 1500 Club Cab

  • Cars & Trucks

Related Question

1996 dodge ram 1500 5.2L no brake lights or turn signals. fuses are good. also the 3rd brake light works fine along with the running lights just no brake lights or turn signals in the rear

  • 1996 Dodge Ram 1500 Club Cab

Open Questions:

0 Answers

runs good in park, but when put in gear why does it cut off?

Apr 23, 2016 | 1996 Dodge Ram 1500 Club Cab

0 Answers

From a stop taking off in first feels like you have your foot on the brake

Sep 18, 2015 | 1996 Dodge Ram 1500 Club Cab

0 Answers

ehow com 96 dodge ram 1500 headlight switch wiring diagram

Jul 22, 2014 | 1996 Dodge Ram 1500 Club Cab

0 Answers

how to install ram 5.9 piston rings

Jul 10, 2014 | 1996 Dodge Ram 1500 Club Cab

See all 1996 Dodge Ram 1500 Club Cab Questions

Related Topics

Cars & Trucks Logo

2,708 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

1998 Dodge Ram 1500 4WD

1998 Dodge Ram 1500 4WD

2004 Dodge Ram 1500

Dodge Ram 1500 Cars & Trucks

1996 Dodge Ram 1500 Club Cab

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14866 Answers

Mike

Level 3 Expert

4372 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...