I have my keys but they dont seem to work and mistakenly activated the immobiliser. when I tried to use the emergency code, I made an error with the code and since then I cant input the correct code as it only shows the fail message
An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert who has answered 1,000 questions.
Re: fail message when I try to use the emergency code
You will have to take the vehicle to someone with the capabilities to reprogram the keys to the vehicle either a vw dealer or someone who has vagcom it is the only way there is no shortcut or bypass to program the keys you need a scantool for vw
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
An immobiliser is generally a passive anti theft system (PATS) which uses an ignition key that has a coded transponder embedded in it. It is activated by being in close proximity to an antenna which is near or around the ignition steering lock. If the code in the key matches the code in the module and everything is working correctly the engine management switches on - simply put, the immobiliser engages or activates when the key is removed and should deactivate when the key is inserted.
It is possible the system developed amnesia and forgot the code when the battery was disconnected or maybe something broke. I really don't know much about them.
A trick that sometimes works - try disconnecting the battery overnight and in the morning open the car, put the key in the ignition and switch on and then go and connect the battery.
If that doesn'y work you will need the services of an auto locksmith or the dealer.
code p0513 refers to incorrect immobiliser key===causes-- immobiliser system
As the engine starts after repeated tries it indicates that there is a problem in either the key fob(check battery/replace battery) or the immobiliser program in the CPU program
Try using a scanner tool to reset the CPU program
If that is not effective you may have to seek the services of a service dealer as the problem may be in getting the key reprogrammed to the vehicle or a new ECM
6-turn key to on (not start) then off, twice this is rewrite mode,have all remotes to reprogram it will clear any lost remotes.
7-remove key from ignition,the door locks should cycle twice.if not start over.it may take a few tries.
8-press lock/unlock together and hold for a second
9-release,and press lock on remote,the door locks will cycle
confirming program.continue to do other remotes you have,steps 8 and
9.if only one in possession,you are done. To end mode open door or insert key into ignition.
You'll need to follow the steps with no more than a 1-2 second delay between each step.. hope it works
If im not mistaken,your car should have an alarm reset/override.Below the steering column,on the dash should be a slot where you put your remote transmitter to deactivate the alarm.If that works,you then need to have your remote checked and coded by a vw dealer.Good luck.
If, when you switch the ignition on, you get a dash light on, the symbol is a car with a key overlaid, you have somehow activated the immobilser You could try disconnecting and reconnecting the battery, this may reset the immobiliser, If this does not work you will have to contact a Hyundai dealer to get the immobiliser unlock code.