Question about 2002 Honda Civic

1 Answer

I need to know the timing marks for a 2002 honda civic 1.7 litre engine

Posted by bryonrai on

Ad

1 Answer

Rob Sinbad

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 709 Answers

There are 4 marks on the crank pulley. When standing on the driver side of the car looking down on the pulley, the mark farthest to the right is the mark for TDC (Top Dead Center). The three marks on the left are for the spark timing. Of these three the mark in the center should align with the arrows/triangles on the timing belt cover when the engine is running and a timing light is shining on the crank pulley. The outer two marks represent Honda's tolerances for the ignition timing. As you look at the cam pulley the correct mark is at 7 o'clock with the two other marks at 3 & 9 o'clock positions. make sure you have correc timing, honda have "O" tolerance when it come to piston and the valves meets. or stop by any auto part store they should have Hane's auto repair manuel for 20.00 buck, worth all the money with proper instruction including picture, great investment to have for the future repair. spend little money to make sure you do the right job. good luck!!

Posted on Aug 28, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need spark plug wire diagram


next time pull wires 1by1 and win, or mark wires at take down
an cap too, all cars, all distribs.(dizzy)?????
or at the least mark the cap.#1
btw2, some caps are marked at factory , is yours?
we need engine type.,
its at alldata.com
and they will ask you the same question. what engine!
in usa , the 4 banger is 1,3,4,2 firing order.
the rotor turns clockwise.or CW
the 1.5 and 1.6L have a square back side cap.
square
3 and4
1 and 2
OR?
1342cc and 1488cc engines
has round dizzy cap. much harder. not marked.
finding TDC #1 is lots more work here.
ask or read the FSM or login to alldata.com. and see the steps.
nut shell. (usa)
the 1992 cam driven dizzy has offset cam, lugs. (bee's knee's)
so the dizzy only mounts 1 way but is static timed.
so on this engine, you put the engine to TDC firiing
that is, with all valves closed on #1 cylinder., ( we use a compression gauge to find TDC. the most easy)
then off the dizzy cap, the rotor now points to #1 firing.
put the #1 wire there, then CW ,3,4,2 in that order.
bam it runs.


as you can see , not all civics are the same, !
data: (what engine?) what country>????
. In North America the Si featured a SOHC VTEC valve train, whereas the VX featured the VTEC-E. The Japanese Si featured a DOHC non-VTEC valve train D16A9. Continuing in the sporty tradition of the original Civic SiR, Honda sold several similarly equipped variants of the fifth generation car, still referred to as the Civic SiR, in Japan, Asia, and Europe. In South Africa, MBSA(Mercedes Benz of SA) built the Civic as the Ballade only in 4dr. A special model was the 180i with the B18B4, that was fitted to Ballade models. A new bodystyle was introduced with this generation called the Civic Coupe, based from the Civic Ferio sedan, and was sold in North America, Europe and Japan. The fifth generation remains popular among tuners and racers alike.

Feb 17, 2014 | 1992 Honda Civic

1 Answer

Need to know where are the timing marks on a 1995 honda civic


Welcome to FIxYa.com


this is for a 16 valve 1.5 let me know what engine size you have

9fae749.jpg316a756.jpg


Regards, Lee Davidian


Thank you for using FixYa,com.

Oct 22, 2010 | 1995 Honda Civic

2 Answers

Where is the timeing mark on a 1992 honda civic 1.5 16 valve


This was listed under the 1994 Honda Civic by the Asker for a 1992 Honda Civic
Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1992 Honda Civic. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
http://www.2carpros.com/car_repair_information/year/1992/make/honda/model/civic/1992_honda_civic_timing_belt_diagram_marks.htm

Mar 29, 2010 | 1994 Honda Civic

1 Answer

I need a honda civic service maual(2004)Whats my best bet?Also are the 1.7 litre motors on these same cars interference if you should break the timing belt.


2 choices...
1) buy factory manual from honda..it has everything but is allmost $150
2) but chilton or clymers manual from local parts store ($15), IT HAS MOST INFO YOU MIGHT NEED

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

Oct 28, 2009 | 2004 Honda Civic

2 Answers

Code error P1361 Honda CIvic LX 2002 -- What it really means? Appear Check engine light intermitent. In my case after Timing belt, water pump, tensor, oil seals and spark replacement. Car lose power and...


P1361 TDC Sensor Intermittent Interruption (I got this from Engine-Light-Help.com)
TDC should mean Top Dead Center.
It is the sensor that tells the computer the #1 cylinder piston is at the very top. And therefore, fires the spark plug.

Since the maintenance done above, I believe the the timing marks for the timing belt is not lined up properly. Being off by one tooth will cause this problem.

Mar 21, 2009 | 2002 Honda Civic

2 Answers

Engine size


On the emissions tag under the hood but anyway it's a 2.2 Litre

Sep 01, 2008 | 1995 Honda Civic

2 Answers

How to check a timing belt on a 2002 honda odyssey.


Belts are replaced by mileage, why do you need to check it? Her is how you check to make surer belt is installed correctly:
Pull the spark plugs and feel the press in #1 cylinder, when you feel the piston pushing air out stop and hand rotate the engine to TDC timing mark on the crankshaft pulley, then check to make sure the camshaft is timed correctly by seeing if the cam pulley notch or index mark is lined up to the cylinder head index mark, since the location of these marks vary fom year to year, refer to a repair manual, your public library is a good source for a a manual.

Aug 02, 2008 | 1999 Honda Civic

2 Answers

Crankshaft pulley timing marks


the red mark is where the timing is supposed to be after u have bypassed the electronic advance.the first white line on the left is tdc.
thanks for useing fixya

May 20, 2008 | 1990 Honda Civic

Not finding what you are looking for?
2002 Honda Civic Logo

2,193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...