The pad is long with five buttons, two numbers on each button. 1-0

Question 1

0helpful

1answer

Valve clearance on a big boy zooka src 250cc

Read the locks and security information in your owner's manual
Find the original, five-digit security code printed on the owner's wallet card in the glove compartment

Enter the factory-set code.
Within five seconds, press the 1 • 2 button on the keypad.
Enter the personal, five-digit code you'd like to use. Each number must be entered within five seconds of the previous one.
For the memory recall feature (if equipped), press the 1 • 2 button to store Driver 1 settings or the 3 • 4 button to store Driver 2 settings.
The doors will lock, then unlock, to confirm that your personal entry code has been programmed.

Nov 12, 2023 • Cars & Trucks

1helpful

1answer

2016 Lincoln Navigator will open doors when pressing just the 9 button on keypad

Enter the factory-programmed five-digit code on the exterior keypad. (9)
Press the "1-2" button on the keypad within five seconds of entering the last digit of the factory-programmed code. This initiates the code-setting mode for the personal code.
Enter your preferred five-digit code number. Make sure that you hit each button within at least five seconds of hitting the one before it, otherwise the code-setting mode will auto-cancel.

Feb 20, 2019 • Lincoln Cars & Trucks

0helpful

2answers

How do I reprogram key pad on driver's door

Go to your owners manual It tells you how to do it

Dec 11, 2015 • 2003 Ford Windstar

0helpful

1answer

Need to change code on door key pad

Enter the five-digit code programmed into the keypad from the factory. Find the key code in the card stored in the glove box of your Mariner.

Press the "1-2" button on the keypad immediately after inputting the factory code.

Enter the five-digit key code you wish to store for your keyless entry system within five seconds of pressing the "1-2" button.

Read more : http://www.ehow.com/how_7442543_program-entry-pad-mercury-mariner.html

Jul 05, 2015 • 2008 Mercury Mariner

0helpful

1answer

Changed batteries, remote still not working.

The remote keyless entry needs to be reset when the battery is changed, and the key pad must be reprogrammed if you need a new code.
here ya go..

Sit in the driver's seat of your Ford 500.

Insert the key in the ignition and turn it from "Off" to "Run" eight times within 10 seconds. The final turn should have the key in the "Run" position. You will hear the door locks engage; this means it is in programming mode.

Press any button on the remote; the door locks will engage again to confirm the programming. This must be done within 20 seconds of entering the programming mode.

Press any button on the second remote; the door locks will engage again to confirm the programming. This must be done within 20 seconds of entering the programming mode.

Turn the key to the "Off" position to complete the programming. The door locks will engage again confirming that programming is complete.

Keypad

Decide on a series of five digits to be your personal code. Your code needs to be an easily remembered series or numbers.

Locate the keypad on the driver's door; it will be directly above the driver's door handle.

Press the buttons that correspond with the factory remote keyless entry (RKE) code. This code can be obtained from the dealership if it has been lost.

Activate the programming mode by pressing the "1'2" button within 5 seconds of entering the RKE code.

Delete the old code by pressing and holding the "1'2" button for two seconds.

Enter the new five-digit code that you created in Step 1. This must be done within five seconds of deleting the old code. The door locks will cycle when the new code is confirmed.
hope this helps you.
Hope this helps

Dec 26, 2017 • Cars & Trucks

2helpful

1answer

How do i turn off the brake warning light on range rover 2004

You can reset this fault code using the buttons on your dash - you don't need a dealer to do this. As you already know, you need to replace your pads and the brake wear sensor - this is a sacrifical item. Once this is done, do the following:-
Using the buttons on your dash - there are 2 - one on the LHS (Trip reset) and one on the RHS (In between Tacho and temp gauge)

*Press and hold Right button and turn ignition to first position (I or Accessory)Display should show "Check Control OK" then a short time later "Test Nr.01"*Press the Left button and you should see the car info in the display. Add the last FIVE digits of the car identity number together (NOT all 6!) to get a unique ID for your car.*Press the Right button repeatedly until you see "Test Nr.19"*Press and hold the Left button until you see the number matching the unique ID you calculated, then release.*Press the Right button to select this.*Press the Left button repeatedly until you see "Test Nr.21" - Reset All Defect Codes*Press Right button to reset the codes.Done!

Mar 26, 2012 • 2004 Land Rover Range Rover

0helpful

1answer

What is the procedure for programming the key pad on the door to unlock the car?

Locate the permanent factory remote keyless entry code in your car's owner's manual or by contacting the dealership.
Enter the factory code on the keypad and press the "1/2" button on the keypad within five seconds to start the programming sequence.
Enter a new five-digit code into the keypad within five seconds.
Wait for the locks to cycle once to confirm the new code was successfully programmed.

Feb 24, 2011 • 1995 Ford Taurus

2helpful

1answer

Keypad door lock does not work..?

it's in owner manual. But, first you have to enter your original code and it must work. then you press the 1 button and then enter a new 5 digit code, then press the 1 button again.

Keyless Entry Keypad To unlock the driver front door (20124) , and disarm the anti-theft alarm control (19A366) , (if equipped):

Enter the permanent factory code.
Enter the owner's alternate code.

To unlock the passenger door(s), press the 3/4 button within five seconds of unlocking the driver door or luggage compartment. To unlock the luggage compartment door (40110), press the 5/6 button within five seconds of unlocking driver or passenger door(s). To turn on the courtesy lamps and light all illuminated components, lift either front door handle (22404) or press any button on the keyless entry keypad (14A626) . To lock all doors, press the 7/8 and 9/0 buttons at the same time with all doors closed. (It is not necessary to enter the key code first.) This will turn off courtesy lamps and arm anti-theft alarm control (if equipped). To program an alternate code:

Enter the five digit permanent entry code into keyless entry keypad .

Within five seconds of pressing last button of permanent code, press the 1/2 button within five seconds of pressing the last button of the permanent code.

Enter any alternate five digit code within five seconds of pressing 1/2 button.
- Enter a sixth digit as follows to indicate operator's memory seat setting to be set by alternate code:
  - 9/0 — no memory recall
  - 1/2 — memory seat position 1
  - 3/4 — memory seat position 2
  - 5/6 — memory seat position 3
- After successful programming, the doors will signal by locking and then unlocking.

---------------------------------------------

Keyless Entry Keypad Does Not Work Properly

Circuit.
Keyless entry keypad.
Electronic door lock control processor.

Open Fuses:

Town Car and Crown Victoria/Grand Marquis
Power Distribution Box (under hood)- K, 40A (Maxi)
Instrument Panel Fuse Panel - 17 (10A), 10 (20A), 8 (15A), 5 (15A) and 4 (10A)

Loose Connectors

Corroded Connectors

Oct 04, 2009 • 1995 Lincoln Town Car

0helpful

1answer

How do you reprogram the keyless door lock code?

Enter the five digit permanent entry code into keyless entry keypad.
Within five seconds of pressing last button of permanent code, press the 1/2 button within five seconds of pressing the last button of the permanent code. (Factory code found on the module).
Enter any alternate five digit code within five seconds of pressing 1/2 button.
- Enter a sixth digit as follows to indicate operator's memory seat setting to be set by alternate code: 9/0-- no memory recall
  1/2-- memory seat position 1
  314-- memory seat position 2
  5/6-- memory seat position 3
- After successful programming, the doors will signal by locking and then unlocking.

The Keyless Entry Module is located inside the drivers side door.

Jun 21, 2009 • 1985 Lincoln Town Car

3helpful

1answer

Help with finding keyless door pad codes and resetting

Open the trunk and up under the package tray where rear speakers mount,on the passenger side you will see the module.It will be black and have 3 connectors to it.It will have a sticker on it with a 5 digit code.It will also have a sticker on one of the trunk hindges with this code if someone has not removed it.Here is how the system works:

Keyless Entry Keypad To unlock the driver front door (20124), and disarm the anti-theft alarm control (19A366) (if equipped):

Enter the permanent factory code.
Enter the owner's alternate code.

To unlock the passenger door(s), press the 3/4 button within five seconds of unlocking the driver front door or luggage compartment door (40110) . To unlock the luggage compartment door, press the 5/6 button within five seconds of unlocking the driver or passenger door(s). To turn on the interior lamps (13776) and light all illuminated components, lift either front door handle (22404) and press any button on the keyless entry keypad (14A626) . To lock all doors, press the 7/8 and 9/0 buttons at the same time. (It is not necessary to enter the key code first.) This will turn off courtesy lamps. To program a temporary code:

Enter permanent code.
Within five seconds of pressing last button of permanent code, press 1/2 button.
Enter any alternate five-digit code within five seconds of pressing 1/2 button.

Apr 15, 2009 • 1995 Ford Taurus

Question 2

Rich Norman

Lincoln Master 502 Answers
Posted on Aug 28, 2009

Rich Norman

Lincoln Master

Joined: Aug 15, 2009

Answers

502

Questions

0

Helped

221842

Points

1628

No idea what your question is, but if you are asking what the pad on the door is, it is a code pad to unlock the doors, open the trunk etc. I don't know if they still do it, but Lincoln use to put the base code on the trunk. Look around for a tag stuck to the trunk arm, or trunk lid. When you enter the code it unlocks the doors and if you push other #'s after the code it will open the trunk, turn on lights etc.

Hope this helps.

Answer 2

A

Anonymous

That would be the Keyless Entry System on the drivers door. Been there at least 30 years on a Ford Product. The factory code is on a White Plastic Card in your Owners Manual Folder. The trunk is accessible if you were inside by dropping the right rear seat back. Where is your spare key and key fob?

Related Topics:

Trustworthy Expert Solutions

The pad is long with five buttons, two numbers on each button. 1-0

2 Answers

Rich Norman

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

Valve clearance on a big boy zooka src 250cc

2016 Lincoln Navigator will open doors when pressing just the 9 button on keypad

How do I reprogram key pad on driver's door

Need to change code on door key pad

Changed batteries, remote still not working.

Keypad

How do i turn off the brake warning light on range rover 2004

What is the procedure for programming the key pad on the door to unlock the car?

Keypad door lock does not work..?

How do you reprogram the keyless door lock code?

Help with finding keyless door pad codes and resetting

Not finding what you are looking for?

2004 LS

Valve clearance on a big boy zooka src 250cc

Ask a Question

Check Out the Latest Top Trucks Report!

Top Lincoln Experts

ZJ Limited

Ronny Bennett Sr.

Thomas Perkins

Are you a Lincoln Expert? Answer questions, earn points and help others

Manuals & User Guides

2004LincolnLSOwnersManual.pdf....

2004LincolnLSQuickRef.pdf....

Related Topics:

Trustworthy Expert Solutions

The pad is long with five buttons, two numbers on each button. 1-0

2 Answers

Rich Norman

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

Valve clearance on a big boy zooka src 250cc

2016 Lincoln Navigator will open doors when pressing just the 9 button on keypad

How do I reprogram key pad on driver's door

Need to change code on door key pad

Changed batteries, remote still not working.

Keypad

How do i turn off the brake warning light on range rover 2004

What is the procedure for programming the key pad on the door to unlock the car?

Keypad door lock does not work..?

How do you reprogram the keyless door lock code?

Help with finding keyless door pad codes and resetting

Not finding what you are looking for?

2004 LS

Valve clearance on a big boy zooka src 250cc

Related Topics

Ask a Question

Popular Questions

Need a diagram of a

Location of low side A/C port on 2001 Lincoln LS V8

2002 Lincoln LS overheating

Where is bank1 and bank

2000 lincoln ls heater not working...thermostat?

Check Out the Latest Top Trucks Report!

Top Lincoln Experts

ZJ Limited

Ronny Bennett Sr.

Thomas Perkins

Are you a Lincoln Expert? Answer questions, earn points and help others

Manuals & User Guides

2004LincolnLSOwnersManual.pdf....

2004LincolnLSQuickRef.pdf....