Question about Daewoo Matiz
Could be flat battery
faulty solenoid on starter motor
Faulty starter motor
Had similar on my car (without an engine redo ) would turn over but not start.
It was car battery . Auto car repair service replaced car battery and no more problem . My car starts and runs without an issue
Posted on Jul 12, 2019
Just wondering how you know there is no petrol and no spark. I agree with others that this sounds like an electrical problem that could be something very simple. I am not familiar with this model so I don't know where the fuel pump/s are but I would start by checking that you have a supply to it. Another thing to check all the connections that were disconnected to do the engine. A ticking noise from the fuse box is normal, this will be a relay powering up.
Posted on Jul 13, 2019
2001 daewoo matiz 800cc
This is the best info I have.
Just as important as the torque values is the tightening sequence. Since modern engine heads are soft alloys this is key. The bolts are tighten down maybe half the final value on the first pass and then tighten down fully on the final pass.
The Sequence is; 7 1 3 5 8 4 2 6 bolts 5&6 are the flywheel side of the engine Torque values Stage 1. 40-45Nm first pass Stage 2. 85-90Nm. second pass
Since you have the head removed look for carbon build up on the pistons.
You may want to get a car service manual from the library or on the internet.
Posted on May 11, 2009
it could be your oil preshure is not up to par or some times if your idle goes to loe it can set off your lo speshure light but i just cant be shur so give it a look but do watch it please
Posted on Sep 14, 2009
Tips for a great answer:
Jul 11, 2018 | Daewoo Cars & Trucks
Jul 21, 2016 | Daewoo Cars & Trucks
Mar 09, 2016 | Daewoo Cars & Trucks
Jan 27, 2016 | 2005 Daewoo Matiz
Sep 14, 2009 | 2001 Daewoo Lanos
May 11, 2009 | 2000 Daewoo Lanos
50 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: