Radio reset/ When alternator replaced on my 1999 Mercedes c230 radio deprogrammed. The original factory code doesn't work. Is there a way to reset? I am locked out.

You can get Mercedes radio codes from this link: https://www.gumtree.com/p/in-car-audio-gps/car-radio-codes./1246627605

You could request a security code from the dealer or an experienced electronics technician must open the redio and read the code from the memory chip inside, but this will cost you money. You'd better replace the radio with a new model w/bluetooth and CD.

Mercedes radio codes can be obtained by following this link:

• Radio Codes and advice are always available here

www.ukbookshelf.co.uk

• Mention FixYa Forum

i want tape code ?benz c230 tape model cm2299 srial no.2299w0926802b

Check the inside of the owners manueall. If that dosent work Mercedes shold give you the code or reset it for free. Dont try to put randum codes it will lock the raidow up.

Good luck

In order to get the radio code for the radio that you picked all you need to do is call the Mercedes Dealership and tell them you need a radio code. Then give them the serial # that is stamped onto the radio. With that serial # they will be able to get you the radio code. Or you can reply back to me with the serial # on the radio and I will call one of the guys I used to work with at the dealer and get the code for you.

you will probably have to enter a code for your radio to work again, look in your owner's manual and if you do not have one then you will have to call a dealer and get the code or try searching online, sometimes you can get help there

This happened to me too. I didn't have the code, and my service tech called the dealer and they gave it to him--we entered it, and I wrote it down in my glove box, and it worked immediately.

go to Mercedes dealer give them your VIN, ask them to look on the VMI for the radio code. If the radio is original, that code will unlock the radio. If it has been replaced or the code does not work you willhave to pull out the radio and give the dealer the serial number to get the correct code.