Cars & Trucks Logo

Related Topics:

Posted on Aug 25, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I have a chevy s10 blazer that will not start it

I have a 1994 chevy s10 blazer that will not start it used to start by spraying started fluid but no longer will start. the plugs have been changed the throttle position and map sensors both have been changed it has good fuel pressure. What could be causing it not to start

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 11,896 Answers
  • Posted on Aug 25, 2009
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Jan 14, 2009
Answers
11896
Questions
1
Helped
3737152
Points
36074

If you have good pressure to fuel rail, then you may want to check the voltage coming to each injector with a voltmeter.
You may also want to check and make sure that every cylinder is getting spark.
If you are getting spark and fuel, then you may have a bad sensor somewhere but the car should be put on diagnostic scanner to pinpoint exact problem location.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
3answers

1994 Chevy S10 Blazer 4.3 Vortec. How to troubleshoot a no spark issue?

Question edited for clarity
Question moved to model category.

Connect it to an OBD Code Reader and check for trouble codes.

Help in the link

https://www.google.com/search?q=1994+Chevy+S10+Blazer+4.3+no+spark

..
0helpful
1answer

87 Chevy S10 Blazer 2.8 wont start turns over replaced ignition switch and new battery

Does it start if you spray starting fluid into the air inlet of the engine? If so the fuel pump has failed.
0helpful
1answer

My 1994 chevy blazer won't fire.

No. Only Ford products have an inertia switch for the fuel pump. Chances are your fuel pump is too weak or not working at all. Most GM trucks require 65psi of fuel pressure to start, 70psi when cold.
Will it start by using starting fluid sprayed into the intake ?
0helpful
1answer

I was given a 1994 s10 Chevy Tahoe vortex blazer

I was given a 1994 s10 Chevy Tahoe vortex blazer??????? It's either a S-10 pick-up or it's a Tahoe or a Blazer not all three . So which is it ?
0helpful
1answer

2000 chevy s10 blazer cranks but won't start????

Check for gas or spark problem on the engine. Check that starting fluid does start the car for a few seconds before dying, indicating a fuel delivery problem, like a fuel pump or circuit to it.

If the car won't start with starting fluid sprayed into the intake, then the ignition system may be at fault, or engine timing.
0helpful
1answer

1990 chevy s10 blazer 4wd. Xmsn whines.

if this happens only in the morning after you start for the first time its the clutch on the fanblade needs replacing
0helpful
1answer

1994 S10 Blazer Tahoe starting problems

Well, obviously someone didn't tell you the truth because spraying into intake doesn't make the vehicle turn over any better. You have ignition or fuel delivery problem. Start by taking fuel line off at intake and crank engine a couple times catching any gas in a cup or something. If none, then trace fuel line back and under vehicle til you find filter. Should be under driverside midway back on inside of frame. Change this and try test again. If no gas, see if fuel pump is on motor(mechanical pump). Change this and test again. If not on motor then it's in gas tank(electric pump). Most cases the tank has to be lowered to take out pump, careful not to drop, dent or make sparks. Some came with access through the floor so check that first. Normally you can hear an electric pump come on when you turn the key. Good Luck
Not finding what you are looking for?

565 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...