Brake job torque specs for honda city

SOURCE: Replacing head gasket on 1995 honda civic, require torque specs and secquence

wow. a lot of bad information on this site. Refer to a manual for the proper torque sequence. The civic I believe is a two step torque procedure. First 22 ft lbs, than 53 ft lbs.

SOURCE: 2005 Grand Caravan Brake Job

Better late than never, right?
According to Haynes 30013: "Dodge Carvan, Chrysler Voyager & Town and Country, 2003 through 2006" Repair Manual:
Caliper Guide Pins or Guide Pin Bolts - 26 Ft-lbs

SOURCE: Torque specs for 96 Honda Accord 2.2L

the main bearings bolts is to 1st step 30Nm or 22lbs ft and the last step is 75Nm or 54lbs ft in this tighten secuence. 9 3 1 5 7 on the top bolts and........ ........ ........ ... 8 6 2 4 10 botton bolts and the connecting rod 45Nm or 34 lbs ft i hope be help you

SOURCE: brake job torque spec

Caliper mounting bracket bolts:
Front: 80 ft-lbs.
Rear: 41
Caliper mounting guide pins/bolts:
Front:
Four-cylinder models 26
V6 models 37
Rear:
All: 17
Hope this helps you.

SOURCE: what is the torque spec for the front center axle nut on a 2003 tahoe?

The torque specs.are for 15k series trucks is 155 ft.lbs.For 25/35 series it`s 133 ft.lbs.Hope this helps.Good luck.