- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Relieve fuel pressure (See procedure below). Remove air duct. Remove accelerator cable bracket. Remove vacuum hose from regulator. Remove fuel return hose from regulator. Remove screws and regulator. Reverse procedure to install.
RELIEVE FUEL PRESSURE Disconnect fuel pump relay (See Diagram). Start engine and hold at 1600 RPM until engine stall. Turn ignition switch off. Allow engine to cool completely before performing any fuel system repairs.
Maybe simply a fuel filter needs replacing. Also check your sparkplugs are the correct ones. Check inside the distributer cap for clean electrode points and clean rotor button. Check the PCV valve is closing on vacuum. Check to see if any of the vacuum hoses are perishing, cracked or loose fitting.