2001 Chevrolet Blazer Logo
Anonymous Posted on Aug 19, 2009

My check engine light DOES NOT come on when i turn my key foward like the other lights! its 01 blazer, 4.3 .....where is the light located, i think the bulb is burnt out! I have bad hesitation when i stomp on the gas, and it boggs down under neth the hood and like back fires ! i replaced the fuel filter today

3 Answers

Bruce Bracey

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Chevrolet Master 1,000 Answers
  • Posted on Aug 19, 2009
Bruce Bracey
Chevrolet Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Feb 08, 2009
Answers
1000
Questions
1
Helped
622716
Points
3633

The light is located next to the gate adjar light in the upper left area of the cluster. It at the 2500 rpm mark on the tachometer.
I would take the vehicle to your local Auto Zone and ask them to scan your car for trouble codes. The will scan the car for you at no charge. Write the codes down and respond back.
Regards,

Testimonial: "awesome "

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Expert 63 Answers
  • Posted on Aug 19, 2009
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Aug 19, 2009
Answers
63
Questions
0
Helped
23896
Points
185

I bet the bulb is burned out. If the engine light doesnt come on after insertning the key and turning to on indicates a burned out bulb in the instrument cluster.

Ad

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Sep 21, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Sep 21, 2009
Answers
1
Questions
0
Helped
830
Points
1

Yeah, I have the same car; same problem..no light during the bulb check when the key is turned to on. No 'service 4wd' light eather. I just bought the car..I think the dealer disabled the lights somehow to sell the car. I've taken out the dash; pulled the insturment cluster. The night running dash light bulbs and the direction signal bulbs are there and easly accessable, but none of the trouble lights. I figgered they must have built them into the dash cluster so they can't be easily removed. I gave up and put the dash back together. I suspect if I took it to the dealer they would tell me the entire cluster has to be replaced at $!!!!!!

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

01 blazer 4.3 4x4 tccm erratic clicking making all indicator lights light on 4 button switch w/service 4 wheel drive then all lights go out on 4x4 does this clicking whether key is on or off key out

I had the same thing happen when my battery terminal was loose; it killed the alternator, so the battery doesn't get charged. There are cheapo battery/charging system testers that plug into the socket, or your local auto parts store often offer free testing of the alternator and battery.
1helpful
2answers

My 03 chevy blazer 4 door has no spark and no fuel i think it might be the passlock and ideas for solutions?

Yes here is a great link for trouble shooting and fixing passlock security issues http://vatspasslockpasskeysecurityhelp.yolasite.com/
1helpful
1answer

Only getting 9 mpg on 01 blazer

Do you have a check engine light on? Is the engine getting to operating temp? Is air filter clean? Is the fan clutch free? Does engine idle and run smooth? Does the transmission have all 4 forward gears including tcc engagement? Are the tires the correct size?
0helpful
1answer

I have a 1996 Blazer 4X44.3 engine 4L60E trans.the engine is new with only 900 miles on it. The trans is new with 386 miles on it. The Park Neutral Switch on the trans is brand new. The prndl printed...

I am no blazer expert but if only the second gear lights up, it sounds like the transmission either thinks its hot because of a bad temp switch or its low level switch is messed up. I would check all switches and systems on the tranny.
0helpful
2answers

Where is the check engine code reader at on my 89 acura ledgend?

the plug for it should be under the dash cuz i think you need a diagnostic reader thing that plugs into it and it reads the code and shows it on the screen
0helpful
1answer

Is there a fuse for the "check engine" light on 96 chevy blazer?

The engine control module is the only thing that can turn on or off that light. With the key on, engine off the light should come on as a bulb check. Light could be burnt out. Good Luck
0helpful
1answer

1997 chevy s-10 blazer, when you turn the key on the dash lights come on & it will start. Lately I turn the key on & the dash lights do not come on, it turns over, but will not start. I have a...

In my 1997 chevy S-10 The gauge dash lights wont turn on when I flip the switch but both turn signals come on solid instead?!!? please help
0helpful
1answer

Check engine light flash

if you turn the key on and it lights up, thats normal, after it starts, it should go off. I dont think theres any problems.
0helpful
1answer

Chevy Blazer 4 x 4 and Engine Light Problems

To your problem with the air bag, I was driving an 07 GMC Sierra 1500 that was doing the same thing. Next thing the charges went on the seat belt tensioners, luckily I was parked because the belts gave me a pretty violent **** back. Turns out the SDM was corroded and caused the action, and there was no reason the air bags didn't deploy as well other than pure luck. I would say get it checked by GM, you don't want to mess around with safety systems. You can visually inspect the integrity of the SDM, it's located under the driver's seat, unfortunately I think the seat has to be removed to see it. Mine had a calcium like build up all over the external casing.
Not finding what you are looking for?

840 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...