The turn signals in my 1993 Buick Regal work, but i have to hold them a certain way to keep them on. How would i fix that?

Flasher Module

https://www.google.com/search?q=1995+buick+regal+turn+signal+flasher+location

Buick Regal (1995) - fuse box diagram - Auto Genius

https://www.autogenius.info > buick-regal-1995-fuse-b...
Jan 16, 2017 - Buick Regal (1995) - fuse box diagram. Year of production: 1995. Instrument Panel Fuse Block. Some fuses are located in a fuse block on the ...

Fuse Box Diagram Buick

https://fuse-box.info > Home > Buick
Fuse box diagram (location and assignment of electrical fuses and relays) for Buick Regal (1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004). Buick Regal (2011-

It is under the dash at back of steering column

sounds like your alternator could be givin up slowly, have a charging test done and after a full charge on the battery have it tested as well.

Replace the flasher unit with an electronic version.
The electronic flashers keep the flashing cycle constant no matter what the load is on it.
Your standard flasher sounds like it is failing.

tuck it back under the vehicle and use some wire ties to keep it in place.

Check front t/s sockets they may have melted.

Did you check the glove box for fuses? There is a switch in the steering column too that could be the issue.

Electrical issues because that yr of buick well all yrs are **** cars and require more main than a girlfriend....Dont worry about it...But if u want to fix change the turn signal switch....:)
Answered by GARY KNOWS ALL

let down the window, take a chain with a hook on it ,hook it on to the  handle and if your strong enough pull the chain hard and hold it from the inside and once again if your strong enough turn around and give it a bruce lee with boots on. be careful to put a few towels between the chain and the finish you don't want to wear the solution afterward.

you will need a lock plate tool once you have taken the lock plate off you need to take the three screws out of the turn signal switch and unscrew the turn signal handle. when you have done this do not pull it out yet. you need to go under the dash and look for the group of wires that run up your steering column. you'll have to unplug them to get enough wire to lift the turn signal switch out. Do not pull these wires all the way out just enough to lay the thing out of the way. Ok once thats done right above the ignition tumblers is either a screw or a tiny indent hole you will have to knock open hopefully its just a screw that just holds it in.
Ok thats enough for now

One other thing the emergency flasher switch has one screw in the middle just unscrew it