Question about Geo Cars & Trucks

Open Question

95 geo prizm fuse diagram

Car turns over but no fire...which fuse is the fuel pump relay

Posted by Karen Sue on

Ad

5 Related Answers

Anonymous

  • 1 Answer

SOURCE: I need location of a 1995 Geo Prizm 1.8 fuel pump relay

I think it is under your rear seat cushion. Remove the rear seat cushion, you'll see the gas tank cover.

Posted on Jun 15, 2009

Ad

Anonymous

  • 1986 Answers

SOURCE: location of fuel pump relay on a 1990 Geo Prizm

under the hood in a fusebox near the firewall

Posted on Sep 10, 2009

Ad

tuyen bui

  • 1025 Answers

SOURCE: where to find my fuel pump relay on a 1993 geo

it's behind the center console

793c1f7.gif

Posted on Apr 13, 2010

Anonymous

  • 57 Answers

SOURCE: 1997 geo prizm wont start no power to fuel pump

look for blowen fuse or look for fuel shut off swich

Posted on Feb 19, 2011

dcramer531

Dcramer531

  • 1654 Answers

SOURCE: have 95 geo prizm with

The oil pressure sending unit will stop the pump from running. This cuts the car off if it senses no oil pressure. Same sensor that gives you the pressure reading or the dummy light.

Posted on Mar 17, 2011

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Fuel pump getting no electricity wont start 1996 geo prizm

Check the fuses and fuel relay. Service manual should show you where they are.
0helpful
1answer

My interior lights dim when i turn my headlights on on my 95 Geo Prism.

Did you check ground strap between Eng. block and ext. fire wall ?
0helpful
1answer

95 geo prizm wont start

wont crank or will not start.? 2 unique things. no crank always results in , no start (unless you push start the car)
hot wiring the fuel pump relay or any relay in the EFI system , invites
blowing the ECU to kingdom come, bad to the bone that.
I fixed them for 50 years. (electronics controls, so know it !)
you do know its really a toyota right?
what ENGINE? each works different.
my prizm text dump.
89-02
joint venture, GM/toyota with 3 engine used.
1.8L or 1.6L
toy engine, 4aFE, 7AFE or 4AG
open hood look
or use the GM RPO tag
or Use the VIN to find motor used.
for docs?
ebay
search
Geo Prizm factory service manual, Duh?

http://www.ebay.com/sch/i.html;jsessionid=D19D723C2EDB4A9FE12E7C01C0677129?_sacat=0&_nkw=geo+prizm+shop+manual&_nkwusc=geo+prizm+shop+manaul&_rdc=1


does car start with test fuel and run, until the fuel runs out.
do you have fuel pressure, while reading the FSM , way of doing it.
some cars only make fuel pressure, cranking and runing.
other make pressure, for 3 seconds key on, and cranking and running only, and all cars drop pump and injections when ECU sees spark die.
that is why stating which Toyota engine YOU HAVE, helps with diagnosis. and please stop hot wiring your car and learn to use a voltmeter. Ive seen $3000 ECU blown up do to bad mechanics.
0helpful
1answer

Where is the fuel pump relay on a 94 prizm

alldata.com
it is all there.

pumps do not get fire. nor spark.
they get 12vdc . (no fire there unless a dead short, and no fuse)
0helpful
1answer

Where is the emergency shut off in a 1995 geo prizm?

All cars, EFI. (some have 3 fuse to operate ECU/spark/ fuel) check em yet?
check power to pump 12v cranking?
no, ? 12v, or 6v? (6v or near is corroded wires /conns)
check power (12v) from fuel pump relay cranking, got 12v there.
if yes , the the path is broken to the rear ) (inertial switch?, not in 95)
if not,12v now, the FP relay is bad or ECU is not turning it on.
if 12v is across the FP relay coil the ECU is working.
if 12v is across this relay, and output is dead, that is a bad relay
or the FI use feeding it is blown.
btw #1 all cars cut fuel (INJ) when spark is detected bad. (ecu)
btw#2 some (software) cut the fuel pump for same reasons.
btw#3, most cars, only activate the FP relay for 3 seconds key on, each time. and some cars only cranking, and running.
all these facts, need to be known to make progress, in EFI.
and more.
1helpful
1answer

Location fuel pump relay on 95 geo prizm

this is a picture showing the fuel pump location, hope help.
2helpful
1answer

Have 95 geo prizm with no fuel pump relays and fuses are good. when i jump the relay i can hear the pump work.. is there any other sensors that would cause the pump not to work

The oil pressure sending unit will stop the pump from running. This cuts the car off if it senses no oil pressure. Same sensor that gives you the pressure reading or the dummy light.
3helpful
1answer
0helpful
1answer

97 geo prizm has fire and fuel wont start

check all your relays with an ohmeter to make sure they all operate. A code would go off usually only if it is an electrical problem. If you are getting fuel and fire, and no codes it is most likely a relay. If you did have codes then I would say sensor. So check those relays
0helpful
1answer

95 geo Flashers

It's probably a blinker relay. If you can find one, it'll probably be remanufactured or from a junkyard. Take it to the mechanic.
Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

65 views

Ask a Question

Usually answered in minutes!

Top Geo Experts

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6929 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14967 Answers

Greg Bernett
Greg Bernett

Level 3 Expert

2993 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...