GM Oil Life System This system calculates the estimated
percentage of the engine oil�s remaining useful life and alerts you
through the DIC when it�s time to change the oil by displaying CHANGE
OIL. Please remember to always reset the oil life system after an oil
change.
Reset the oil life system Press and hold the control stem
for more than two seconds while OIL LIFE is displayed. When completed,
the system will reset and a beep will sound.
Good Luck and Remember.
Change Your Mind, Not Your Oil.
Use the First In Synthetic Motor Oil's.
See My Bio For Information & Contact Details.
Nice, but doesn't work for my 2006 Silverado. My manual says:
1. Turn ignition key to RUN with engine off.
2. Fully press and release the accelerator pedal 3 times within 5 seconds.
If the OIL LIFE RESET message flashes for 10 seconds, the system is resetting.
3. Turn the key to LOCK.
The procedure is in the owners manuel, Try this, Display the OIL LIFE’ on the Driver Information Center (DIC). Press and hold the reset stem. The oil life will change to 100% and a beep will sound. Turn the key to LOCK. If the ‘CHANGE ENGINE OIL” message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure. I hope this helps.
faulty check valve in the oil filter replace oil filter.
1,066 views
Usually answered in minutes!
×