At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Need illustrated parts breakdown for 2000 ford focus interior light assembly. I need to know if the bezel is available as a separate part or if I need to order the complete light assembly.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Its part of the hazard flasher switch , or should I say the switch is part of it ! Where is your flasher switch located ? In the radio bezel ? the trim plate around the radio if you don't know what a bezel is . Oh yea , to answer you question , yes turn signals do go through it !
Go to the parts department at a chevy dealer. ask the parts guy to show you an illustrated parts breakdown on the thing. this costs nothing and they will usually print you the page. then you know the name and part number and cost.
If your going to be removing all of this I recommend you get the Haynes repair manual on the vehicle so you have the illustrations and directions for dis-assembly and assembly of the starter. The starter should be located on the bottom right of the engine where the Transmission attaches.
Since it works, although reluctantly, we can safely say that the circuits to the lock actuator are working properly. The door lock actuator will be your problem-child. This is integrated into the door latch assembly and must be replaced as a unit. You will have to purchase the parts from the dealer, as they are not available in the aftermarket.
I know this might be a dumb question but, do you have the manual? The Focus owner's manual contains information on how to replace various secondary outside and interior lights.
When you open the hatchback look behind where the light is and you will see a small hole. Unscrew the screw that it is there. You also need to unscrew another screw that is beside the light on the outside (top right). Then you just pull the whole light assembly off the car. Next disconnect the wire from the back of the light bulb assembly. Next, twist the light bulb assemble and pull it out. You now have access to the bulb. Hope that helps.
×