Question about Dodge Cars & Trucks
Some fixya user told me a website reliable-store it is very good.. I used it to repair my shredder it had some spark issue which wasn't easily fixed. you can go there and try
Posted on Jun 20, 2019
there are 2 sensor on the carb . you may need to replace both to find out whiche one it is . try this also give it gas while starting and when it starts you will have to keep your foot on the gas a little to keep it running if it runs that way its one of the 2 senors .
Posted on Jan 21, 2009
On the 318 (5.2 liter) V-8 that was in my 1973 Dodge Dart Sport, I started having oil pressure problems with valve ticking and clunking around the crankshaft around 173,000 miles. Prior to the problem, I had bought a couple cases of Pennzoil on sale. Needless to say, when I finally dropped the pan, the sludge had baked to a ceramic-like texture. I soaked the pick up screen in solvent to disolve the crud, replaced the oil pump, and replaced the main and rod bearings with undersized bearings (.001" undersized). The oil pressure went up to normal, the valve tick went away, and the clunking on the bottom end went away. The engine felt as tight like new, and should have lasted for another 150,000+ miles if the nitwit I sold it to hadn't wrapped it around a light pole. By the way, don't ever use no-name, Pennzoil or Quaker State motor oil. The minimal savings will cost you in the long run.
Posted on Feb 26, 2009
Tips for a great answer:
Nov 11, 2016 | 1997 Dodge Dakota
Dec 21, 2015 | 1999 Dodge Durango
Mar 20, 2013 | 2001 Dodge Dakota
Nov 05, 2012 | Cars & Trucks
Mar 28, 2017 | 1992 Dodge Dakota
Jan 20, 2009 | 1997 Dodge Dakota
Oct 12, 2008 | 1998 Dodge Dakota
23 people viewed this question
Usually answered in minutes!