No, you'll have to either drop the tank OR if you can figure out where the pump is located you can cut a access hole in the floorboard of the truck. Good luck, careful with sparks if ur using a grinder. Just sayin
No tank has to come down
SOURCE: access to in-tank fuel pump
No access, the fuel tank must be removed to get the fuel pump module out.
SOURCE: Where is the fuel pump in a 3.8L 2000 Chevy
unfortunately not. The tank will have to be dropped to get to the pump
SOURCE: where is the fuel pump relay switch located under
it should be in the distribution center with the other relays under the hood
SOURCE: Low power and missfire, have
I have replaced Distributor cap, rotor, wires, and spark plugs in my 2000 Oldsmobile Bravada AWD smart track. To replace one spark plug I had to collapse the steering column, but everything went O.K. Did you marked the wires?. Did you reconnect them in the firing order?
The fuel pump is located In the fuel tank. Remove the fuel tank and take the fuel pump out from the top. This is part cost $300 and need some skills to be replaced.
The fuel filter it is directly in front of the fuel tank. Another one is incorporated with the fuel pump.
SOURCE: How do you access the fuel pump 1999 oldsmobile bravada
The fuel pump is located inside the gas tank, in order to replace it you must remove the gas tank from the car, remove the fuel pump module retaining ring and then remove the fuel pump assembly. You will need a good hydraulic floor jack, safety jack stands and a really good set of hand tools, a helper is a must. This is a about a 4 hour job. Be very conscious of the fire hazard here, fuel vapors can ignite VERY easily.
Testimonial: "thank you"
405 views
Usually answered in minutes!
×