Question about Subaru Cars & Trucks
Step one 37 ft lbs then tignten 120 degrees more
Step one 11 ft lbs then tighten 90 degresss more
89 inch lbs
132 inch lbs
Posted on Dec 02, 2008
The haynes book is not recommended since there are numerous mistakes and they still will not update. One of the biggest is the firing order.
The factory service manual is the only way to go.
Head bolts - 46 - 50.5 lbs (there is an order sequence for the bolts)
Intake & exhuast manifolds- 13.5 - 20 lbs
Flywheel - 41.5 - 47 lbs
Clutch cover - 13.5 - 20 lbs
Posted on Mar 17, 2009
Head bolts are torque to yeild so you MUST use new bolts.
Tighten cylinder head retaining bolts in numerical sequence in three steps as follows:
Posted on Mar 19, 2009
SOURCE: torque specs for toyota tercel
Hello vienotkelly: The correct Main bolt torque is 42 foot pounds. The connecting rods torque to 29 foot pounds. The torque sequence for the head bolts and the correct way to tighten the bolts are attached to this reply. Thak You for using FixYa. Roger
Posted on Apr 15, 2009
Main Bearing Cap Torque-42 Ft. Lbs.
Head Bolts Step 1-33 Ft. Lbs. Step 2- Additional 90 Degrees
Rod Bearing Nuts-29 Ft. Lbs.
Hope this helps
Posted on Sep 20, 2009
Tips for a great answer:
Sep 09, 2014 | 2004 Subaru Impreza
Jul 30, 2011 | 2008 Subaru Impreza Wrx
Feb 23, 2011 | 2008 Subaru Impreza Wrx
Apr 16, 2010 | 2006 Subaru Impreza
Nov 18, 2009 | Subaru Outback Cars & Trucks
Nov 10, 2009 | 1996 Subaru Impreza
Jul 17, 2009 | 2005 Subaru Impreza
Jun 11, 2009 | 1998 Subaru Impreza
33 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: