SOURCE: 06 Liberty light switch wiring
You usually have 2 wires off the brake switch.
With a test light you should have 12 volts (test light lit) on one wire.
The other wire will have 12 Volts or light the test light when you step on the brake pedal.
If there more than 2 wires, just check which wire has 12 volts when you step on the brake pedal.
SOURCE: Which wire or wires are the cold side of the
use a test light, the one that does not light it with no pressure on pedal & lights it with pressure on pedal is the one you want
SOURCE: 2004 tail light wire diagram/colors, need both bra...
I can't get my brake lights to work. the rear one in the window works but the tail ones won't work.do you have any ideas as of what to try to fix this problem. Thanks!
JO
SOURCE: 1996 dodge ram 1500 P/U, looking for wire color at
if you have a test light then check for voltage at the wire that only has voltage when the brake is applied that is the wire that your looking for.don`t remember the color.
Testimonial: "thanks, never though about that approach"
SOURCE: brake light switch wires broken
Here is a picture of the brake light switch. Also at this point just buy a new connector and splice it on, much easier.
91 views
Usually answered in minutes!
×