Question about Dodge Ram
just finished tonight with the same problem on my 2000 ram, i cut the studs out with a drimel tool, and also the latch, with this out of the way the door opened easily,, have to replace bottom latch later . total time about 1 hour tigerhunting
Posted on Nov 07, 2008
Two 10mm bolts, or nuts, hold the handle on from inside the door. dont forget to remove actuating rod from old handle. probably clip is broke also.
Posted on May 30, 2009
Adjusting the handbrake is easy.Between the two front seats where the cup holders are behind there is a cubby hole.This has a bottom which can be easily prised out.You will see the handbrake adjusters which you just need to tighten.
Posted on Jan 01, 2010
This link is from the handle to the latch. The door panel has to be removed in order for this problem to be fixed. The linkage is inside the door panel, it is a small diamater metal rod called a link. If you do the job yourself be careful not to break the door panel. In a shop, the labor is 1 hour for the job & if any, parts will be a seperate charge.
Posted on May 08, 2010
Got this idea from mpvclub.com: Get some stainless or aluminum sheet metal screws, drill pilot hole into the handle and into the receiving part behind, then screw in the screw. Do on both sides of handle (get appropriate length screw.) When done, get some putty or hardener to fill in the screw slot, let dry, then sand smooth, then paint with body color. Result is great and inexpensive.
Posted on Jun 25, 2010
Tips for a great answer:
Sep 30, 2016 | 2011 Hyundai Sonata SE
Feb 08, 2016 | GMC Cars & Trucks
Jan 17, 2015 | 2011 Ford Focus
Apr 04, 2014 | 2011 Dodge Dakota
Mar 26, 2014 | 2011 Hyundai Santa Fe
Mar 19, 2013 | 1998 Dodge Ram 1500 4WD
Mar 14, 2010 | 2004 Dodge Ram 1500
May 30, 2009 | 1997 Toyota Camry
Nov 30, 2008 | 2004 Dodge Intrepid
Jan 21, 2021 | Dodge Ram Cars & Trucks
59 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: