Question about Daewoo Cars & Trucks
Got trimming marks write rotor must show towards no 1 can u bend valves and if crank pully marks is on 0 on bottom cover is motor on t d c
Have a look at this link, it is the 2.5L, but just be sure all looks same. Scroll down pictures on left & click on picture to expand
Posted on Jan 02, 2009
SOURCE: Daewoo Matiz crankshaft pulley
remove the outer small bolts to remove balancer(pulley) the big centre bolt holds crankshaft gear for timming belt which slides off with timming belt removed.
Posted on Sep 13, 2009
Hi, it must be done from underneath (unless you remove the entire engine), hoist up the car and work from underneath.
Drain Gear box oil.
Remove wheels, disconnect bolts and swing out wheel hubs, remove CV Joint drive shafts (both sides).
Disconnect two get change levers
Disconnect clutch cable.
Then replace it with the new one ...
Posted on Jul 27, 2010
Tips for a great answer:
Jul 21, 2016 | Daewoo Cars & Trucks
Apr 27, 2016 | Cars & Trucks
Sep 08, 2011 | Daewoo Lanos Cars & Trucks
Aug 20, 2011 | 2001 Daewoo Lanos
Aug 01, 2017 | 2000 Daewoo Korando
Dec 05, 2009 | 2000 GMC Jimmy
Aug 24, 2009 | 1989 Toyota Camry
Aug 12, 2009 | 2001 Daewoo Lanos
May 12, 2009 | 1999 Daewoo Nubira
Aug 03, 2008 | Daewoo Nubira Cars & Trucks
41 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: