Question about Daewoo Cars & Trucks
Set crank and cam marks got spark but no start when motor on t b c wher must rotor face to no one
timming marks on cams face each other 3 and 9 o clock crank mark at about 6 o clock mark in cover and sump auto adjuster arrow should be in v mark to set this requires turning water pump by loosening water pump bolts slightly be warned some times this causes pump o ring seal to leak if turning.
Posted on Jun 21, 2009
Are you sure you have correct timing? its definetly a fule problem, if timing is good then turn your key to the on position and try to listin for the fule pump to prime. While the key is in on position go to fuel rail, there is a valve on fule rail called sharader valve. Get a small screw driver and press valve in to check if car has fule pressure. if pressure is present then it is incorrect timing or possible bad cam sensor.
Posted on Mar 01, 2010
Tips for a great answer:
Apr 05, 2017 | 1994 Toyota Corolla
Jan 22, 2017 | Cars & Trucks
Nov 06, 2014 | 1990 Geo Storm
Jun 23, 2011 | 1994 Isuzu Rodeo
Jun 09, 2009 | 1999 Daewoo Lanos
May 19, 2009 | 2000 Daewoo Lanos
May 15, 2009 | 1999 Daewoo Leganza
May 12, 2009 | 2000 Isuzu Trooper
Apr 07, 2009 | 1993 Nissan Pathfinder
27 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: