Question about 2013 GMC Acadia
SOURCE: 2005 silverado door locks
i work at a chevy dealership,just had the same problem my fix was to replace the power door lock relay located on drivers side interior fuse block
Posted on Jan 21, 2009
SOURCE: Power door locks won't work
You need to have someone or yoursef check the body control module with a compatible scan tool. Thats where the problem you are having resides. It may need a software update or replacement. You can also disconnect the battery for a few minutes, that will cause the BCM to reset and may fix it.
Posted on Jan 28, 2009
It will be a bad microswitch in the mechanical lock driver's door and because of the microswitches do not get the impulse when other doors to unlock! Unfortunately, this microswitch is part of the lock and can be purchased separately! Only whole lock! ( Nr. 9. is it )
Posted on Jul 01, 2010
Testimonial: "Excellent advice - thanks!"
SOURCE: My Mitsubishi colt CZ1 (07
Central locking works by way of little electric motors that engages and disengages the door lock. The drivers door has an additional set of contacts in the actuator which signal the controller when it changes position. The controller activates the servo motors when a signal is received from the receiver or from the drivers door servo motor. So in your case I suspect the motor part of the drivers door actuator is done for.
To replace you will have to remove the inner driver's door panel to get at the actuator. The actuator itself cannot be repaired and needs to be replaced as a unit.
Posted on Apr 29, 2011
Testimonial: "Very helpful answer and a prompt response. Thanks"
Tips for a great answer:
Aug 22, 2017 | Pontiac Cars & Trucks
Feb 06, 2016 | 2013 Ford - Explorer
Mar 03, 2015 | 2007 Ford F-350 Super Duty
Oct 03, 2014 | 2005 Chevrolet Malibu Maxx
Jun 06, 2017 | 2013 Hyundai Santa Fe
Mar 16, 2017 | 2005 Chevrolet Tahoe
Oct 21, 2011 | 2007 Chevrolet Malibu Maxx LTZ Hatchback
Jul 26, 2009 | Buick Regal Cars & Trucks
Jan 22, 2009 | 2006 Pontiac Vibe
Aug 26, 2008 | 2003 Chevrolet Astro
116 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: