Question about Dodge Ram

1 Answer

2007 Dodge Ram 5.7 hemi no crank no start no power to stater??? tried to pull codes no comunication to ecm

Posted by matthew davis on


1 Answer

Rocky Ram

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    Visited the website for 60 consecutive days.

  • Dodge Master
  • 471 Answers

Check battery first make sure is fully charge

Posted on Mar 19, 2019


5 Related Answers


  • 1010 Answers

SOURCE: Dodge Ram 1500 can it have a plow?

Yes It can and It should not void the warranty. Contact your dealer.

Posted on May 15, 2008


Ronnie Houston

  • 2920 Answers

SOURCE: Dodge Ram 1500 can it have a plow?

if you do it do it at the dealer that you got it from so it wont void the warranty. that way you keep it in place and they can also tell you the specifications as to what you need to do ,if anything to the front of the truck

Posted on Jan 26, 2009

Ted Schore

  • 7353 Answers

SOURCE: 05 5.7 hemi burning 1 qt every 700 miles

does not sound good. how many miles on engine? knocking may be piston slap if it goes away hot. may be engine replacement time.

Posted on Sep 19, 2009

Testimonial: "thanks for help "


  • 249 Answers

SOURCE: replace timing chain on 03 dodge ram 1500 with 5.7 hemi

i have an 02 and i purchased a repair manual from autozone

Posted on Jan 05, 2010


  • 79 Answers

SOURCE: how to remove the spare tire on my 2007 dodge ram

on your rear bumper or just above it there should be an access hole that you can stick the jack handles through ,then you should be able to lower the tire, its like a winch unwinding

Posted on Sep 26, 2010

Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Well a bad crankshaft sensor cause engine to backfire through intake and not start 05 Dodge Ram 1500 5.7l hemi

get the codes from the ecm.most parts store will do that for free and ask what the code is.

Feb 08, 2015 | 2005 Dodge Ram 1500

1 Answer

Not starting

Take the positive wire off the battery & let it sit for @ 10 min then put it back on & it should start. I had same problem on my 2007 ram hemi

May 24, 2013 | 2005 Dodge Ram 1500

1 Answer

Will a faulty oil pressure sensor shut the truck down/2007 dodge ram 2500 5.7 hemi

Yes,here it is.

Nov 17, 2012 | Dodge Ram 2500 Cars & Trucks

1 Answer

I have a 2007 Dodge Ram 1500 hemi and the problem with it is it will crank and idle just fine. you can put it in gear and move a little ways then it dies and you can crank it back up just fine. i have...

On the side of the carb there a fuel sensor there...Has tiny screws and wires running to it. If it goes bad your car will idle..Your ECM sends a signal to open it for fuel..If it goes bad it want turn...Might try tapping likely on it...Go to your auto store and ask them about it first...Then you will understand better about how it works and if this seems to be your issue

Dec 08, 2017 | 2007 Dodge Ram 1500 Quad Cab Sport

1 Answer

2007 Dodge Ram 1500 (Quad) 5.7 Hemi 4 wd The truck will not shift into gear. There is no noise problem. Transmission fluid is possibly a little high. The check engine light is on.

well try to get a ecm reader on it and it will prob tell you what is wrong with it cause everything now on these newer models is controled by the ecm or pcm

Mar 15, 2011 | 2007 Dodge Ram Truck

1 Answer

2007 dodge ram gas hemi, intermittent, randomly, the engine will not crank, battery good, starter works great when it does crank. when this happens the check engine light comes on, disconnecting the...

I believe that there is an electronic relay between the ignition switch and the solenoid on the starter that is causing your intermittent starting problem.

Jan 20, 2011 | 2007 Dodge Ram Truck

1 Answer

Check engine light 2007 ram 1500 hemi. I've owned

There is no standard interval for the CE/MIL light. You need to get the codes scanned at a local AP store to see what codes you have.

Apr 16, 2010 | 2007 Dodge Ram 1500 Quad Cab Sport

1 Answer

2007 dodge ram fuse problem

my 2008 dodge ram is displaying no fuse underneath the spedometer. it makes a clicking noise about 5 times and turns over fine. runs normal/drives normal. it delays when turning off (i turn the key off and it takes about 5 seconds to turn off) remote entry does not work.

Feb 12, 2010 | 2007 Dodge Ram Truck

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers


Level 3 Expert

4372 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides