2003 Dodge Grand Caravan Sport FWD. Acceleration and braking

Dodge Grand Caravan Maintenance & Repair Questions ...

www.cargurus.com > Questions > Dodge > Grand Caravan

CarGurus2003 Dodge Grand Caravan Power Door Problem ... hjc61 asked a 1999 Dodge Grand Caravan 4 Dr LE AWD Passenger Van Extended Maintenance & Repair ...

2002 caravan not starting, reads "done" on odometer - Discussion ...

www.topix.com > Dodge Caravan

Jun 3, 2013 - I have a 2002 Dodge caravan n the relay on but there is no power getting to the ... Also, on a 2003 Grand Caravan, "DONE" on the odometer is the diagnostics.... I have a 2002 Dodge grand caravan awd just after fixing a new ...

2003 Dodge Grand Caravan Sport AWD - for sale in ...

? 2:17
https://www.youtube.com/watch?v=s5ZEJE3CLRo
Jul 10, 2013 - Uploaded by SummersAuto
2003 Dodge Grand Caravan Sport AWD - for sale in LOVELAND, C ... We specialize in getting our customers financing on car loans through our bank no ... Exterior Mirror,Power Door Locks,PowerWindows,Rear Brake Type: ...

Minivan all wheel drive setups and performance - Allpar

www.allpar.com/eek/awd.html

Description of all wheel drive setup in Chrysler, Plymouth, and Dodge minivans. ...The Rear Driveline Module has a differential in it, and sends the power to the rear wheels ... According to a Chryco engineer, the AWD system was not incorporated for the ... I have a 1997 AWD Grand Caravan and have recently replaced the ...

Dodge Grand Caravan Reviews and Owner Comments

repairpal.com > Car Reviews > Dodge

December 24, 20142002 Dodge Grand CaravanVisitorSalisbury, NC .... seat belt straps replaced, power window stopped working, Only 30 thousand kms. .... 20235.00 miles and no major Needs Radiator. and leeks oil But I love it this is my 3rd ... I have a 1993Dodge Grand Caravan LE with a 3.3L V6 and All Wheel Drive.

Dodge Grand Caravan Repair and Maintenance - RepairPal

repairpal.com > Cars > Dodge

I have never had that issue in 50 years of doing brake work

You were given the dealership Dog & Pony Show as always

When you get a new vehicle the brakes are assembled dry at
the factory & rust on the train or car carrier

Like other vehicle parts they have to come apart,rust removed
& lube applied to all sliding surfaces & done at least once a year
on all vehicles

The same thing for spark plugs & trans fluid

30 days after you get it, you pull the plugs to gap them
& put anti-seize on them & change trans fluid to remove
the normal wear of bushings & debris you get when new

there is a tbi on dodge caravan and grand caravan for the front and rear brakes locking up . it is a recall if you are under 60,000 miles

jack up vehicle, remove tire. knock out old stud with a hammer and punch. put new stud in from back if need be. to draw it up tight.use a lug nut with something under it so when you tighten the nut it brings the stud into position. remove the nut you put on. and replace the tire. good-day! if the brakes and rotor are in the way. you will have to remove them to replace the wheel stud.

Front brakes are pretty easy, just go to http://www.customtacos.com/tech/index.php?article=37 for step-by-step instructions with pictures. On the bolts that it tells you to remove, it says they are 17mm, on the caravan they will take a 12mm socket to remove (at least on my 2007 short wheel base SE). The only issue I have with this site is it does not tell you how to remove rotors, and I NEVER replace brake pads without having my rotors turned or replaced. after you have swung the caliper up like the instructions on the website tell you to, you'll notice the rotors are still held in place by the caliper mounting bracket. It is held on with two large bolts that bolt in from the back. If I remember right, they are a 3/4" or 19mm socket. If they've been on for a while (my first brake change was at 48,000 miles) then you will need WD40, a big socket wrench, and a lot of elbow grease to get those loose. Once that's free, you can easily remove the rotors. I would take them to Checker or another local auto parts store that turns rotors, they will let you know if they can be turned or if they need to be replaced. If you get new rotors, don't forget to clean them off with brake cleaner before installing them!!! They are coated with an anti-rust chemical that is very sticky and will smoke for miles and affect your braking. For rear brakes (assuming they are drums, if not, they will be the same as the front), there is a pretty good tutorial at http://trashcars.net/videos/1436/how-to-replace-rear-drum-brakes.html. You should also have your drums turned or replaced when you replace the rear brake shoes as well.

Check for bad sensors or cracked hub ring

you have to get new brakes as soon as possible. depending on how long it has been doing that you may need new rotors to about 300 to 400 bucks if there al disk. [email protected]

check the motor motor mounts for movement,
watch how far engine rocks forward or back with it running and foot on brake

This is a good case for warranty repair. Often a noncovered part takes out a covered one and at least something is fixed free. Contact your salesperson first. Your car has been made for years and they know what is normal and not normal for it. It has been least than 11 months despite being over 12000 miles.

The problem isn't at your brake calipers. Your rotors have a slight warp to them causing your vibration when you stop.