Question about 2001 Pontiac Bonneville
Posted by Anonymous on
the fuel pressure regulator is on the end of the fuel rail it is held on by a torx screw relieve the fuel pressure using the schrader valve on the fuel rail remove regulator holding screw and replace new regulator be carful not to damage o-rings on new regulator
Posted on Nov 02, 2008
Is it the 3400 v6 or the 2.2l four cylinder? If it the v6 then what you have to do is first know where it is. It located on the end of your fuel rail on the driver side of the car. There will be a plastic hose coming off the top of the regulator, unplug it. You then have to undo your fuel line that runs into the bottom of the regulator. You have to use a wrench to get it off, not sure what size it is. Once you undo the fuel line the next step is to unbolt it from the fuel rail. There will be two screws that run in the side of the fuel pressure regulator that are facing the driver side of the car and are threaded in towards the passenger side of the car, just undo those two screws and the regulator should come off. Just repeat the process backwards to put it back on.
Posted on Jan 09, 2009
The oil pressure sending unit is located behind the oil filter, Threaded into an aluminunm housing. It has wiring that plugs into the sending unit. The oil filter has to be removed and you will need a deep well socket and a 6 inch extension. Change the oil and the sending unit together.
Posted on Feb 02, 2009
It is located under the drivers side floor acessable from under the vehicle.
For pics and instructions check out
Your rating is very important to me
Was this helpful?
Posted on May 26, 2009
GM Century/Lumina/Grand Prix/Intrigue 1997-2000
Fuel Pressure Regulator - Removal & Installing
The fuel pressure regulator is a diaphragm-operated relief valve with fuel pump pressure on one side and regulator spring pressure and intake manifold vacuum on the other side. The regulator's function is to maintain a constant fuel pressure across the injectors at all times. The pressure regulator compensates for engine load by increasing fuel pressure as engine vacuum drops.
The fuel pressure regulator is serviced as a separate component. When servicing the pressure regulator, make sure that the O-ring back-up, large O-ring, filter screen and small O-ring are properly positioned on the pressure regulator.
Fig. Cutaway view of a typical fuel pressure regulator
REMOVAL & INSTALLATION
The need to work as cleanly as possible cannot be over-emphasized. Even the smallest amount of dirt, if allowed into the fuel pressure regulator and/or the fuel rail, will find its way to the fuel injectors. The nozzle openings of the injectors are very small. Keep hands and tools clean. Clean the areas to be disconnected with a suitable solvent. Carefully cover open fittings and connections to keep out foreign material. Dirt in the injectors almost guarantees a clogged fuel injector and engine performance problems.
3.1L and 3.4L (VIN E) Engines
Fig. Exploded view of the fuel pressure regulator mounting-3.1L and 3.4L (VIN E) engines
Other size engine can find in autozone.com (free register).
Hope this help (remember rated this).
Posted on Feb 08, 2010
Tips for a great answer:
Oct 13, 2014 | 1999 Pontiac Bonneville
Dec 29, 2012 | 2000 Pontiac Bonneville
Feb 27, 2012 | 2001 Pontiac Bonneville
Nov 11, 2010 | 1996 Pontiac Bonneville SE CA Value
Oct 19, 2010 | 2001 Pontiac Bonneville
Jun 27, 2010 | 1995 Pontiac Bonneville
Feb 10, 2010 | 2001 Pontiac Bonneville
Apr 12, 2009 | 1997 Pontiac Bonneville
Feb 06, 2009 | 1994 Pontiac Bonneville
78 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: