SOURCE: snapped wheel studs on front wheels and need to change them
you have to hammer the studs through the spindle to get them out. then **** the new ones in with a nut and lots of washers. put grease on the washers and threads before you **** the studs in.
SOURCE: Grinding noise on 2002 Olds Bravada
Try making tight turns to the right and then to the left. see if the grinding noise comes and goes. It could be your C/V joint and they need to be replaced. The noise will only come when your making the tight turns, you don't have to go fast. Walking speed will do and you can hear it with the window open or someone walking beside the Bravada. Good luck and keep me posted. Be glad to help.
SOURCE: front end sounds like snapping rubberbands when turning wheel
sounds like tie rod ends with the shaking.check struts and sway bar links on the snapping. hope this helps you.
SOURCE: Put vehicle in reverse, backed up, turned wheel
Woah. This is a new one, but it sounds like your rack is binding up and causing this friction. It could be a pump problem, so check the power steering pump belt tension and fluid level. Short of that, you need to get your front end looked at. I'm not being "extra careful" here when I say this - you should get it towed to the service center and not drive it. This thing could get you hurt. . Good luck.
SOURCE: on a 4 wheel drive is the front driveshaft suppose
yes the driveshaft will turn all the time
140 views
Usually answered in minutes!
×