Question about Hyundai Cars & Trucks
You would need to run diagnostics to check for any DTCs first. Secondly you could try unplugging your ABS pump and cleaning out the pins and socket. Thirdly try the basics, check fuses and brake fluid level.
Did you have any work done on it recently regarding brakes/driveshafts/wheel bearings/cv joints or anything that would involve removing of any of those components? -if so, your ABS “wheel” or pickup sensors could be damaged.
Posted on Feb 28, 2019
SOURCE: ABS brakes shudder
YOU NEED A SCANNER TO MONITOR THE WHEEL SPEED SENSORS. THE ABS IS SENSING A SKID AND THE ABS IS ACTIVATED WHEN THIS HAPPENS. THERE MAY BE A CODE FOR THE HUB THAT IS CAUSING THE ABS TO ACTIVATE.
CHECK THE WIRES FROM THE SENSORS FOR BREAKS OR CHAFFING. AN OHM READING OF THE SENSOR SHOULD BE 850-1200 OHMS, AND AND A-C VOLTAGE READING SHOULD BE 100 MV WITH YOU TURNING THE WHEEL BY HAND.
RATE ME, PLEASE
Posted on Jul 06, 2009
you may have damaged the ABS sensor or wire to the sensor up front check the wire that runs from the inner finder well and make sure it connected to the ABS sensor on the spindle
Posted on Jul 15, 2009
Tips for a great answer:
Jul 06, 2012 | 1999 Cadillac DeVille
Jul 01, 2012 | Cars & Trucks
Oct 06, 2011 | 1998 Ford Windstar
Jul 25, 2010 | 2002 Hyundai Santa Fe
May 06, 2010 | 2000 Hyundai Accent
May 05, 2009 | Hyundai Santa Fe Cars & Trucks
Mar 27, 2009 | 2006 Hyundai Tucson
26 people viewed this question
Usually answered in minutes!