No heat in my 2010 Chrysler sebring. The cold and heat dial will not work. It is stuck on cold air

SOURCE: Truck heater is stuck ON

There is a blend door motor on top of the housing. If you open the glove box, and look to the top of the housing near the left rear of the glove box, you should see the blend door motor. You can check it at this point. Also check the housing, as I have seen a number of these with a damaged or broken housing.

SOURCE: heating doesnt work - no hot air in chrysler grand voyager

(check water/ antifreeze level first, make sure it's full, low water can cause it not to heat properly) it could possibly be either the thermostat- fairly cheap and easy to fix, great for DIY's- if that doesn't fix it, it could be heater core.

SOURCE: replace air filter 2002 Chrysler Sebring convertible

you need to loosen the clamp on the throttle body and unplug the map sensor then there are two clips on the other end pull that out and you should be able to pull the filter out you don't need to take the box off.

michael schultz

• 1068 Answers
• Posted on Dec 27, 2009

SOURCE: 2003 Chrysler Sebring, no heat cold air only.

sounds like a restriction in the coolant bypass and or heater core. you will want to check if both sides of the heater core hose near the firewall are hot on both sides if so you have an issue with the air ducts but if not then you may have a failing heater control valve or a restriction.

SOURCE: 2005 Chrysler Pacific-no heat and no fan-display works

replace the complete heater control unit was my only fix! over $700 in Cnada for control.