Question about Dodge Ram
There's a website reliable-store
all heavy equipment re pair issues servicing, loading, wiring, engine problems everything is covered here its a must try
Posted on Mar 20, 2019
You are experiencing what is called a CCD Bus short in the instrument cluster circuit board. (chrysler calls it the "chrysler collision detection buss) it is how all of the controllers and modules communicate on that vehicle. Get a new one and you should have no problems, and used ones are a HUGE gamble. Other vehicles that are extremely bad for this are, caravans, neons, sebring coupe/conv, strates, and cirrus. It will also cause a no start condition that is EXTREMELY hard to catch.
Posted on Nov 22, 2008
SOURCE: Restarting problem
most likely problem is the crank sensor. they are bad about not wanting to work after they get hot, which explains why it works after a cool down. they usually won't set codes in that situation. but if you have a check engine light you should get it scanned first. auto zone will do it for free.
Posted on May 10, 2009
Sound like your oil pick up screen is some what clog, if you have good oil pressure at 1st start and then oil pressure gone after running, check screen.
Posted on Dec 29, 2009
i had same issue and after lots of money and time it ended up being crank shaft sencer behind starter on my 97 dodge ram 1500 5.2 in diff place on v10s and desiel
Posted on Sep 13, 2011
Tips for a great answer:
Mar 24, 2014 | Dodge Dakota Cars & Trucks
Jul 15, 2009 | 2001 Dodge Ram 1500 Truck 2WD
Apr 13, 2009 | 1997 Dodge Ram 1500 Club Cab
Mar 23, 2009 | 1998 Dodge Ram 2500 2WD
Jan 14, 2009 | 1993 Mercury Cougar
Dec 21, 2008 | 2001 Dodge Ram 2500 Truck
Jul 10, 2008 | 2001 Dodge Ram 1500 Truck 2WD
42 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: