Hi I really need help on my Ford figo 2013...the indicator lights and harzard are not working at all and i think it affecting my brake ligts too. What can I do or what can be the problem?

SOURCE: Brake Lights and Blinkers don't work

try tapping the hazard switch on and off a bunch of times fairly hard. these switches have a tendency to go bad and neither the hazards or turn signals will work

SOURCE: 2006 Ford Ranger. Rear passenger side tail light

Bad earth connection.Clean or replce wire.

SOURCE: indicators and break lights do not work.

Did you just look at the bulbs too determine if they're okay? Alot of bulbs look just fine, but really the elements are broken.

When you say indicators, which indicators do you mean?

If all else is good, it could be the brake switch under the brake peddle, the switch is not very expensive, and very easy to replace (provided you can twist, turn, and get your body somewhat undr the dash on the drivers side)

Hopefully this will help you.

Thanks for letting FixYa.com fix ya.


Terry

SOURCE: I have a Ford Fiesta 2007 1.4 TDCI. When I brake

Check the wiring harness. Sounds like it has come in contact with the break assembly and is shorting out. Look for exposed wiring where the cover has worn off coming in contact with the break. Tape all exposed wiring and be glad you haven't had a small fire.

SOURCE: Our 1997 olds cutlass supreme has brake light

the brake lights run through the turn swich on all cars . i have seen this many times on gm cars and truck . trust a 20 year auto shop owner chang the switch