One side of my panoramic roof will not close. Help !

31 20A Sliding roof control unit 32 20A Sliding roof control unit 33 20A Sunroof roller blind control unit
https://fusesdiagram.com/audi/fuses-and-relay-audi-q7.html

from

https://www.google.com/search?q=2007+Audi+QUATTRO+3.6+fuse+for+panoramic+window

..

Try the dealer here i dont have one and a haynes manual will only have a typical wiring diagram ,

go on line to sciontc.com and type ion this it should bring up how to remove it

Hi,
You can use my modification instructions, it will work for the X5 too. Take the download (pdf version 2) of thread 14 of below link: http://forums.5series.net/topic/96566-e61-panorama-sunroof-issues/
Success!
TFHODD

yes.m.b. has several service campaigns for this problem

Have window closed. Press the vertical vent button (press in towards roof). Hold for 20 seconds and the window will start to open, keep holding button until the window goes all the way back and then all the way forward. BMW's initialization procedure.

I just had the same problem... the rear glass has 2 suports, which you will need to insert a long screw driver in it and force them back manually... It's a pain, but I can get you all the pictures to this procedure...

hello X3 driver, you can initialize the sunroof by pushing straight up on the button, (the same position that is use for vent). You will need to hold the button for atleast 30 seconds. The cassette should go to vent position, then to close, then to fully open, then back to close. Once the fully closed position has been reached, release the button. that's all there is too it. Glad to see BMW is taking care of it's customers.

title says X5, but description says X3. i'll explain for an X5, but X3 with the pano should be the same. and i'll explain function of the roof, not reprogramming.

button is located on the panel at the top near the front & center windshield. its the switch on the far left on this panel. its a switch that not only toggles, but also slides forward & back.

with your finger in front of the button, slide it back & release. this will make the cover slide back and store revealing the sun roof. you know have 2 options (tilt the sunroof up or open the roof completely).

to tilt it up, press up on the rear of the button and release. the rear of both roofs will pop up. to close, push up and release the front of the button or slide the switch forward.

to slide it open completely, repeat what you did to open the protective cover (slide the switch from front to back). the roof will open completely and stow out of the way. to close, slide the switch forward and release. pano roof will now close.

to close the cover, slide the switch forward again.

neat trick: if you want to tilt the sunroof open without opening the protective cover, press up on the rear of the button (when the cover is closed) and release. the cover will separate in the middle exposing about a 2-3 inch mesh, then tilts the sunroof open. to close, push the button forward again.

also, if you are above a certain speed (can't remember what it is off hand) with the sunroof open or tilted, it will close automatically, then perform the neat trick on its own to keep air coming in.

one last trick: if you want to open the windows and sunroof from outside, press & hold the unlock button (forward button on the key) and you will see the windows go down, then the roof will open to vent. releasing the button will stop the motion of the windows & roof.

hope this answered what you were asking.

Ha, i just replaced one of these today. Yes they are serviceable but a pita. There is also a fix for the rear glass not closing. The rear tilt mechanisms need to be replaced bmw part number 54 13 7 240 682.