Location of the blender door on a 2011 Dodge Avenger

SOURCE: location for turn signal relay

It depends on the model of avenger you have, coupe or convertible. It can either be in the steering column with the multifuntcion switch(basically the turn signal lever and wiper control asembly) or it is in the center console behind the radio.

SOURCE: 2008 dodge avenger spark plug location and socket size.

• 2008+ Dodge Avenger 2.4L 4cyl.
• Remove plastic cover on top of engine, just pull on each corner for it is friction fit.
• Once removed you will see 4 black spark plug covers with one hex type screw holding each.
• Remove Hex screw and place aside, pull upward to remove plug boot from plug.
• To remove the plug, use a 5/8 socket with a 6" extension. Once plug has been turned out all the way and you cannot get the plug up and out of the hole, just press the plug boot back on the plug and pull it back up.
• Gap and replace 4 plugs with the same or equavalent type,. Drop plug down the hole and use socket to align and tighten until just snug, then torque to manufactures specifications.

ZJ Limited

• 17989 Answers
• Posted on Oct 03, 2011

SOURCE: belt route 2011 dodge avenger

I find this diagram that I hope that help you...

ZJ Limited

• 17989 Answers
• Posted on Oct 27, 2011

SOURCE: Location Of input an output Speed Sensor on 1996 dodge avenger

According with repair manual, output speed sensor is located on the Transmission, generally positioned over the park gear and monitors transmission output shaft rotating speed; check some details in the next image...



Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

SOURCE: where is the location of the iat on the 2011

what ''iat'' stand for?