Cars & Trucks Logo

Related Topics:

R
Russell Miller Posted on Oct 26, 2018

Skoda Fabia TSI 2012 roof top antenna is loose. How to tighten

5 Related Answers

Anonymous

  • 1071 Answers
  • Posted on Jul 21, 2009

SOURCE: Describe how to remove steering wheel of skoda

triple squares are what the center bolt uses you need a small flat hbladfe to remove air bag there are 2 hole at 9 and 3 on backside of steering wheel get screw driver in there and move until you feel springs put pressure on spring you can only do one at atime so be carefull no to push bag back on once that is off uno bolt steering wheel will slide right off

Ad

Brian Anderson

  • 399 Answers
  • Posted on Dec 15, 2009

SOURCE: just changed the battery on my skoda fabia vrs

The easiest way to reset the computer coding system is to unhook your battery and let it sit for 3-5 minutes. If the code comes back on after starting your car then whatever is causing the code is still happening.

Beware that you will most likely need to know the code to unlock your radio if it has the theft protection built in where if power is unhooked from the radio the radio is locked until you follow the procedure outlined in your owners manual with a code to get it back working. If you don't have the code, your Volkswagen dealer can help you out as well.

Anonymous

  • 1874 Answers
  • Posted on Dec 18, 2010

SOURCE: need torque settings for cylinder

Torque settings for cylinder head bolts for Skoda Fabia 1.4 16v

Cylinder head bolts tightening order:

tdisline_116.jpg

IMPORTANT NOTE: RENEW BOLTS!

Stage 1: Tightening torque = 30 Nm
Stage 1: Tightening torque = 90 Degrees
Stage 1: Tightening torque = 90 Degrees

Please do rate my response. Thanks!

Anonymous

  • 1874 Answers
  • Posted on Aug 10, 2011

SOURCE: Epc light on my skoda fabia 16V is showing on my

First of all you need to access the Engine Control Module (ECM) using suitable diagnostic equipment connected to the data link connector of the car, in order to pull out all DTC's memored. DTC = Diagnostic Trouble Code. Then you will bu full informed about the root cause of the problem, and you will be able to repair & replace bad pieces and reset the ECM. Then the EPC (Electronic Pedal Control) yellow light will turn OFF.

Anonymous

  • 1874 Answers
  • Posted on Sep 01, 2011

SOURCE: I NEED A DIAGRAM FOR

The alternator belt routing diagram for a 1.4 OHV Skoda Fabia with A/C:

tdisline_852.jpg
AC = Air Conditioning (A/C)
CS = Crankshaft
Gen = Generator (Alternator)
G = Guide pulley
T = Tensioner
WP = Water Pump

Please do rate my response. Thanks!

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Reset Service Interval indicator on 2012 Skoda V Fabia SE 1.4.

dear .S.W off , press button in hold , then S.W ON , service oil or insp.) will blinking , turn anticlockwise and hold (-------)coming , release and S.W OFF , S.W ON ,same step when you choose ( insp.)
0helpful
1answer

Skoda fabia loosing oil pressure once engine is running

dear. first wan know which engine . 1.6 or 1.4 / 1.2
if 1.6 you need to remove oil pan and clean oil pump pipe
1.4 you need to check con.rod bearing condition .mostly replace with oil persure sender.
1.2 you need to clean oil filter housing with O ring
0helpful
2answers

Fuse diagram skoda

u can call me 92122222228
0helpful
1answer

Skoda fabia steering unlock problem

try to move steering little left / right before you try .need to put grease inside the pin of steering lock
0helpful
1answer

Esp light on dash board stays on skoda fabia classic

dear check rear brake light if its working when apply brake ,if Not
replace brake light S.W .
3helpful
1answer

Need torque settings for cylinder head bolts on a 52 reg skoda fabia 1.4 16v any help much appreciated thanks

Torque settings for cylinder head bolts for Skoda Fabia 1.4 16v

Cylinder head bolts tightening order:

tdisline_116.jpg

IMPORTANT NOTE: RENEW BOLTS!

Stage 1: Tightening torque = 30 Nm
Stage 1: Tightening torque = 90 Degrees
Stage 1: Tightening torque = 90 Degrees

Please do rate my response. Thanks!

Not finding what you are looking for?

73 views

Ask a Question

Usually answered in minutes!

Top Skoda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29492 Answers

Are you a Skoda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...