Question about Lincoln Cars & Trucks
Have a qualified repair shop check it out . Electronic module involved , WCM - wiper control module . May have code's stored . You have no clue as to how it works.
The windshield wipers are controlled by the wiper control module and the driver-operated multi-function switch on the steering column, with the ignition switch in RUN or ACC position.
There are four modes of wiper operation: OFF position, the wipers move to and stay in the park position; Interval position, the wiper control module causes the wipers to cycle, separated by pauses, pause time length being determined by switch location; LO position, the wipers will operate at low speed continuously; HI position, the wipers will operate at high speed continuously.
The windshield washers are controlled by pressing inward on the wiper switch end of the multi-function switch. The washers will operate as long as the switch is depressed. If the wipers are in the OFF or Interval operating mode, the wipers will begin in LO speed and the washer pump will pump fluid from the reservoir to the nozzles. When the switch is released, the wipers will complete three cycles and then return to their previous setting. In LO or HI mode, no change in wiper operation will occur during washer operation.
The washer fluid level sensor is in the windshield washer reservoir (17618) and is monitored by the hybrid electronic instrument cluster (HEC) and displays a WASHER message when the fluid level is low. The washer fluid level sensor and windshield washer reservoir are replaced as an assembly.
Posted on Oct 15, 2018
its the fuse inside the fusebox under the hood. the box is right in front of the battery. I had the same problem. 4 dollar part. look it up in the owners manuel and your good to go.
Posted on Mar 29, 2009
check the fuses under the dash and under the hood
failing that go to auto zone they can show you the location and quote the parts price too
remem ber to turn on wipers and turn on ignition dont start the car look under hood listen for winding noise locate noise locate wiper motor
if making wiring noise remove and re conect wiper arms inside as they are prone to poping off if over loaded like when frozen to wind screen they pop the conector rather than burn the motor out ]
Posted on Jan 16, 2010
SOURCE: fuse for windshield wiper motor
It may be the windshield wiper module instead of being the motor, since you have had that replaced 3x already. There should be no fuse issue.
Posted on Jul 18, 2010
Tips for a great answer:
Nov 12, 2017 | 1985 Lincoln Town Car
Oct 21, 2013 | Lincoln Town Car Cars & Trucks
Oct 08, 2009 | 2000 Lincoln Town Car
Jun 15, 2009 | 2001 Volkswagen Jetta TDI
Feb 25, 2009 | 2001 Oldsmobile Intrigue
Sep 23, 2019 | Lincoln Cars & Trucks
172 people viewed this question
Usually answered in minutes!