Question about Ford Cars & Trucks
Doesn't have any relay's for the door locks . The (GEM) generic electronic module controls the door locks . Your best bet , take it to a qualified repair shop.
The Door Lock Function When a door lock control switch is moved into the lock position or a door lock cylinder is rotated to the lock position, a ground is provided to the lock circuit input to the generic electronic module (GEM). The GEM then provides 12 volts to one side of the door lock actuators contained in the door latch assembly and simultaneously grounds the other side of the door lock actuators. This completes the door lock actuator circuit, causing the door lock actuators to rotate a cam assembly, which then locks the doors.
The Door Unlock Function When a door lock control switch is moved into the unlock position, the door lock switch grounds the unlock circuit input to the GEM. The GEM then provides 12 volts to the opposite side (relative to locking the door) of the door lock actuator(s) contained in the door latch assembly and simultaneously grounds the other side of the door lock actuator(s). This completes the door lock actuator circuit, causing the door lock actuator(s) to rotate a cam assembly in the opposite direction, which then unlocks the door(s).
Generic Electronic Module (GEM) Diagnostic Trouble Code (DTC) Index DTC Description Source Action B1300 Power Door Lock Circuit Failure GEM Go To Pinpoint Test D . B1309 Power Door Lock Circuit Short to Ground GEM Go To Pinpoint Test D . B1310 Power Door Unlock Circuit Failure GEM Go To Pinpoint Test D . B1341 Power Door Unlock Circuit Short to Ground GEM Go To Pinpoint Test D .
Have a qualified technican diagnose the problem .
Posted on Aug 23, 2018
SOURCE: ford focus 54 door lock
The fuse for the door locks is in the back of the fuse block. The fuse block is held in with a couple of bolts. There is only one fuse back there.
Posted on Jul 19, 2008
get in your car close door hit the unlock button then put key in the ignition cycle the key from off to on (STOP BEFORE START POSITION) cycle key off to on 7 times after the 7th trime the doors should lock the unlock automatically that means u are in trainning mode hit the unlock button on key fob. the key fob should now work if it doesn't then try changing batt
Posted on Nov 27, 2008
Problem with 2001 1.6 Focus which i was going to purchase for the wife, but problem with central locking! key fob totally dead even when i tried the reprogramming trick (key in ignition press button several times) and when locking/unlocking manually, central locking only working intermittently! Please help regards steve
Posted on May 30, 2009
Tips for a great answer:
Aug 19, 2018 | Ford Cars & Trucks
Jun 13, 2012 | 2008 Ford Focus SE Sedan
Feb 17, 2012 | 2007 Ford Focus 2.0
Jun 08, 2011 | 2007 Ford Focus (3 Door) Hatchback
Nov 27, 2010 | 2007 Ford Focus (3 Door) Hatchback
Nov 06, 2009 | 2000 Ford Focus
Jul 10, 2009 | 2007 Ford Focus (3 Door) Hatchback
Mar 27, 2009 | 2007 Ford Focus (3 Door) Hatchback
181 people viewed this question
Usually answered in minutes!