Question about 2002 Hyundai XG350

Open Question

Code1632 on 02xg350 hyundai

Shift solinoid d over drive short or open checked power to ssolinoid relay from ecm no power to excite relay

Posted by Millard ackerman on

Ad

5 Related Answers

emissionwiz

Marvin

  • 85239 Answers

SOURCE: Troubleshooting code PO753 ECM or PCM.

It is more likely the solenoid, the PCM is very seldom the problem, about 3% of the time to be exact.

Posted on Oct 16, 2008

Ad

Anonymous

  • 55 Answers

SOURCE: ecu/ecm relay

It is located behind your radio/heater control bezel.moz-screenshot-1.jpg Labor time to replace 1.4 hrs

moz-screenshot.jpg

Posted on May 02, 2009

Ad
csmock132

Clint Smock

  • 4669 Answers

SOURCE: 1995 gmc truck shift problems

It sounds like the power supply is dead for the transmission. Check the transmission fuse for power.

Posted on May 30, 2009

Anonymous

  • 1 Answer

SOURCE: 92 cadillac deville a/c blows fuse

I can't locate the under dash fuse block on my 92 cad sts. Help please. The AC/Heat blower will not come on, I think I have a blown fuse.

Posted on Jun 12, 2009

morse008

Duane Morse

  • 1111 Answers

SOURCE: rear door wont open.relay works so does solinoid

the striker has moved causing it to stick or the lock itself has seized up try and push on the panel and turn the key as well as pull up on it while you turn the key ...if this all fails remove the inner-panel and look for the lock/s and the connecting rod to the locking mechanism itself and ensure it is attached if the arm is off reattach and the clip will have a tab that holds it securely in place .

Posted on Oct 17, 2009

Testimonial: "thank but the panel is partially blocked by the rear seat"

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Wont start2004 dodge grand caravan sxt code p0685 show on dash


P0685 DODGE - Auto Shutdown Relay Control Circuit Failure
Possible causes - Faulty Engine Control Module (ECM) power relay
- ECM power relay harness is open or shorted
- ECM power relay circuit poor electrical connection
- Faulty (ECM
Possible symptoms:
Engine Light ON (or Service Engine Soon Warning Light) P0685 Dodge Description: Short or open in Auto Shutdown (ASD) relay circuit, this relay is under the hood in the relay center.

Oct 14, 2016 | 2004 Dodge Grand Caravan

1 Answer

Check engine light has P0685 code. Engine stalled while driving. What are the possible causes of this? Is this an expensive fix?


- Faulty Engine Control Module (ECM) power relay
- ECM power relay harness is open or shorted
- ECM power relay circuit poor electrical connection
- Faulty (ECM)

Apr 24, 2015 | Cars & Trucks

1 Answer

I have a suzuki jimny 2002 and get check engine light on and code P1600 an P0763 and when the switch is on i hear the relay on the TCM. can you suggest?


P0763 - Shift Solenoid C Electrical
Possible causes- Faulty shift solenoid C valve
- Shift solenoid C valve harness or connectors
- Shift solenoid C valve circuit is open or shorted
- Low transmission fluid level
- Dirty transmission fluid
When is the code detected?The P0763 code is detected when the gear required by the ECM does not match the actual gear when vehicle is driven.Symptoms- Engine Light ON (or Service Engine Soon Warning Light)
- Transmission will not shift gears.P0763 Description Shift solenoid valve C is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position.

P1600 - Loss of KAM (Keep Alive ECM memory) Power; Open Circuit

Check all fuses related to the ECM

Jun 22, 2012 | Suzuki Jimny Cars & Trucks

2 Answers

I have a 2000 chevy caviler an the starter kicks out an runs when u touch the positive wire to the battery even when the car isnt switched on. Someone put a relay in do you think the relay could be bad...


PULL RELAY OUT AND TOUCH THE BATTERY TERMINAL IF IT STILL ENGAGES
CHECK STARTER SELENOID COULD BE SHORTED OR SINGNAL WIRE RUBBED TRUE
AT STARTER 12 VOLT BATTERY FEED

Apr 13, 2011 | 2000 Chevrolet Cavalier

2 Answers

Torque convertor clutch circuit electrical code po743


CIRCUIT DESCRIPTION
The shift solenoid valve SL is turned ON and OFF by signals from the ECM to control the hydraulic pressure
acting on the lock–up relay valve, which then controls the operation of the lock–up clutch.
DTC No. DTC Detection Condition Trouble Area
P0743
 ECM detects open in solenoid SL circuit 4 times when solenoid
SL is not operated (2–trip detection logic)
 ECM detects short in solenoid SL circuit 4 times when solenoid
SL is operated (2–trip detection logic)
 Open or short in shift solenoid valve SL circuit
 Shift solenoid valve SL
ECM
Fail safe function
If the ECM detects a malfunction, it turns the shift solenoid valve SL OFF

Jun 10, 2010 | 1999 Ford Expedition

1 Answer

1995 Cadillac ETC has hard shift (all gears work) error code P076, clear error code and code P76 returns immediately. Change ECM and code P076 is fixed, but after driving the care a short distance error...


yes change fluid. if that dosnt work buy new shift solinoids. and replace them. also check all the wiring from transmission to pcm and from conector to solinoids when u take the pan off. just disconect the solinoids. and use a digital multimeter innva brand put it on continuity and touch wire after wire till it beeps indicating wiring is touching . some will beep because thay are still conected and would have to remove transmission to disconect them. i just had this exact problem on my 94 sls . i replaced solinoid a-b and did a fluid change and checked the conections going to the transmission. and it runns good now

Jan 04, 2010 | 1995 Cadillac Eldorado

1 Answer

My 2003 Hyundai Santa Fe ABS light is staying on but the ABS is not engaged.


Here are all the possible problems which can turn on your ABS light.

C1101 Battery voltage over volt: 18V or more ○ ○ BR - 69
C1102 Battery voltage low volt: 9.5V or less ○ ○ BR - 69
C1200 FL wheel sensor: open or short to ground ○ ○ BR - 66
C1201 - Range/Performance: speed jump or damaged exciter ○ ○ BR - 67
C1202 - No signal: air-gap error or wrong excite ○ ○ BR - 68
C1203 FR wheel sensor: open or short to ground ○ ○ BR - 66
C1204 - Range/Performance: speed jump or damaged exciter ○ ○ BR - 67
C1205 - No signal excite: air-gap error or wrong excite ○ ○ BR - 68
C1206 RL wheel sensor: open or short to ground ○ ○ BR - 66
C1207 - Range/Performance: speed jump or damaged exciter ○ ○ BR - 67
C1208 - No signal excite: air-gap error or wrong excite ○ ○ BR - 68
C1209 RR wheel sensor: open or short to ground ○ ○ BR - 66
C1210 - Range/Performance: speed jump or damaged exciter ○ ○ BR - 67
C1211 No signal: air-gap error or wrong excite ○ ○ BR - 68
C1604 ECU hardware: ECU internal or valve failure ○ ○ BR - 70
C2112 Valve relay: valve relay or fuse failure ○ ○ BR - 70
C2402 Motor-Electrical: open or short to battery, motor relay, fuse or motor lock fail ○ ○ BR - 71
C1503 TCS switch failure δ ○
C1605 CAN Hardware failure δ ○ BR - 71
C1610 CAN Bus off failure δ ○ BR - 71
C1611 EMS Time-out failure δ ○ BR - 71
C1612 TCM Time-out failure δ ○ BR - 71
C1613 TCM Un-matching failure δ ○ BR - 71
C2227 Brake disc overheat δ ○
C1274 G-Sensor signal fail (only 4WD) ○ ○ BR - 72
C1275 G-Sensor open or short to ground (only 4WD) ○ ○ BR - 72
You'll need a scanner which is compatible with Hyundai's ABS system to retrieve any DTC's (Diagnostic Trouble Codes) stored in its computer. Any time the ABS light comes on, there's a DTC stored in its computer - that code will tell you where the problem exists. Then you can go from there.

Jun 03, 2009 | 2003 Hyundai Santa Fe

1 Answer

1995 gmc truck shift problems


It sounds like the power supply is dead for the transmission. Check the transmission fuse for power.

May 30, 2009 | 1995 GMC Sierra C1500

1 Answer

My 95 motecarlo wont shift into over drive just changed filter


lockup solinoid ? what is the trans fluid condition ? clean and red or brown and smelly ? the ecm controls the speed at which your overdrive will lockup . IS the check engine light on ?

Dec 20, 2008 | 1995 Chevrolet Monte Carlo

3 Answers

92 cadillac deville a/c blows fuse


The conector for the a/c compressor comes with a diode that keeps power from returning after the compressor cycles off. Check or replace the connector/and or diode and see if that fixes the problem

May 18, 2008 | 1992 Cadillac DeVille

Not finding what you are looking for?
2002 Hyundai XG350 Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers

Brad Brown

Level 3 Expert

18562 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...