2001 eclipse spyder gt how do I replace the crankshaft position sensor and auto zone says I don’t have a camshaft position sensor but I’m showing a code for both car runs but is sluggish and won’t get over 75 need help

SOURCE: 2001 Jeep Grand Cherokee code P1391

I would check to be sure that the timing chain hasn't jumped at all ..

SOURCE: Crankshaft Position Sensor and Camshaft Position Sensor

REMOVE OR DISCONNECT

1. Serpentine belt from the crankshaft pulley.
2. Raise the vehicle on a hoist.
3. Right front tire and wheel assembly.
4. Right inner fender access cover.
5. Using a 28 mm socket, remove the crankshaft harmonic balancer retaining bolt.
6. Crankshaft harmonic balancer using tool J 38192 or equivalent.
7. Sensor electrical connector.
8. Foreign object deflector.
9. Sensor and pedestal from block face.
10. Sensor from pedestal.

1. Loosely install the crankshaft sensor on the pedestal.
2. Position the sensor with pedestal attached on special Tool J 37089.
3. Position the special tool on the crankshaft.
4. Bolts to hold the pedestal to the block face, torque to 20-40 Nm (14-28 lb.ft).
5. Torque the pedestal pinch bolt to 3-4 Nm (38-40 lb.in).
6. Remove special tool J 37089.
7. Place the special tool 37089 on the harmonic balancer and turn. If any vane of the harmonic balancer touches the tool, replace the balancer assembly.
8. Balancer on the crankshaft.

• Apply thread sealer (GM 1052080) or equivalent to the threads of the balancer bolt.

1. Torque the crankshaft bolt to 140 Nm + 56°(104 lb.ft + 56°).
2. Foreign object deflector.
3. Electrical connector.
4. Inner fender shield.
5. Tire and wheel assembly, torque to 140 Nm (104 lb.ft).
6. Lower the vehicle.
7. Serpentine belt.

SOURCE: Car runs and then will not accelerate and shuts off

So replace them.

SOURCE: 2004 nissan sentra bad camshaft sensor, replaced

I am having the exact same problem. Did you get it running

SOURCE: where are the camshaft and crankshaft position

crankshaft sensor is and the hormonic balance pulley and cam sesoor should b and the front of the motor toward the top. But to b sure u should get a book for u vehical