Question about Hyundai Cars & Trucks

1 Answer

How do I get the boot lock out of Hyundai i30 2013 to replace it when boot won't open

Posted by Jan Morris on

Ad

1 Answer

Vernon Taylor

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hyundai Master
  • 6,991 Answers

Sorry I am not familiar with the model.

Most cars of 2013 vintage use an electric release for the boot or tailgate and often there is no other type of release. If this is the case it is worth checking the vehicle handbook for the possibility of an emergency release.

When the electric release doesn't work, depending on the level of sophistication of the system, it could be a fuse, faulty wiring, faulty release button or switch or a faulty lock release motor or solenoid. It is unlikely the lock is faulty.

The last time I encountered a non-opening boot I had to remove the rear seat and wriggle into the boot and remove the boot lid trim panel and locate the wiring in order to connect an independent 12 volt supply direct to the lock solenoid. Once the boot was open it was a simple matter to replace the switch.

The previous time was similar except the problem was a worn lock and the time before the wiring had broken inside the harness where it jumped from the body to the tailgate.

Posted on Aug 02, 2018

Ad

1 Related Answer

oscars78

  • 97 Answers

SOURCE: Boot is in locked position

U need to be more specific or detailed with ur question

Posted on Jul 14, 2011

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have Hyundai Sonata 2016 se somehow my cargo trunk got stuck in open boot position i am trying to close the trunk but it stucked and not coming down any help wl be appreciated Thanks


You will probably find you have pressed the key lock when the boot was open and the latch on the boot has closed have a look were it locates on the lock bar and see if it is open then if not try with the key unlock button.
This should work or you may need to push it open with a screw driver.

Mar 15, 2018 | Hyundai Cars & Trucks

1 Answer

Car boot won t open


Went through every site recently but couldn't get the answer.
For my 1985 Toyota corona the answer is.
Firstly open the boot.
1. Look at similar boot in open position.
2. Slide steak knife in at 45 degrees upwards from rear to front under the boot. Ensure the end of the blade is aiming at the lock.
3. Push steak knife handle to left.
Next fix the problem.
A. Search for defective component and replace it.
B. After replacing the basic lock a component still needed to be bent
to activate lock whilst key was turning.
Finally test boot without locking it.
Use screwdriver to click mechanism as if locking, before using key to unlock.

Jan 05, 2014 | Cars & Trucks

1 Answer

Back door close lock


check 2 c if the door latch isnt alredy closed if it is pull handel and use screw driver 2 flip it back out

May 12, 2013 | Hyundai Entourage Cars & Trucks

1 Answer

I have a Jaguar X300 3,2 '96 model with a jammed boot lock. On the instrumentpanel in the dashboard it indicates that the tailgate is open. I've tried to open with the button on the tailgate and...


the wiring around the trunk/boot hinge may be broken/opencircuit. the security system thnks the trunk/boot is open use the manual key to get in to the trunk and repair the wiring

Apr 29, 2017 | Jaguar Xj Series Cars & Trucks

2 Answers

Replace licence plate bulb 2003 accent hatchback


open boot and locate bulb holder inside boot lid. gently squeeze the clips to release the holder and push out the holder gently. replace bulb, and push holder back in.

Mar 08, 2010 | 2003 Hyundai Accent

2 Answers

Cant get into boot


hi from uk as a getz owner(my wifes car) i do understand problem may i suggest this is most probably the lever on rear of the lockwhich is behind the cover on boothatch is probably loose hence when key is used the lever that connect to rod link and releases latch is slipping on key lock operation but when c/locking is used on drivers door it opens boot latck by motor no problem SO remove the panel from hatch held by screwsnear screen and pop plastic buttons on surround you will now have visual access to lock mech's and by using info provided above ? i am sure you can sort the problem if you use both key in lock operation and c/locking method to observe linkage it may be as suggested or a simple little ajustment of rod linkage hope this helps/inspires you ? best wishes from n/west uk lanc's

Dec 01, 2009 | 2003 Hyundai Accent

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

733 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...