2007 dodge caravan serpentine belt diagram - Dodge Cars & Trucks

Mike Butler

• 6674 Answers
• Posted on Sep 04, 2008

SOURCE: 1993 DODGE CARAVAN SERPENTINE BELT DIAGRAM

Link for a 99 - 3.3.L, but diagram should be same. Scroll down to figure 11 when you click on this link.

http://www.autozone.com/addVehicleId,2546504/initialAction,repairGuide/shopping/repairGuide.htm?pageId=0900c1528003c186

SOURCE: I just need a routing diagram for the serpentine

Below are 2 diagrams, 1 with AC, 1 without for serpentine belt routing:

SOURCE: 1995 dodge caravan 3.0 L serpentine belt drive

hope

SOURCE: I need a diagram for a 1994 dodge grand caravan se

Try this

Testimonial: "you did find the diagram that works, thanks."

SOURCE: Need serpentine belt routing diagram for 1994 Dodge grand caravan

3.3L?
Looking at the engine from front (right side of the Van): Stating at the Top, Going Left to Right and Clockwise:
Over the Alternator
To under the Idle Pulley,
To Over the AC Compressor.
To the Left Side of the Water Pump.
To the Right side and Under the Crankshaft Pulley
To the Right side and Over and Down the Tensioner
To Under the Power Steering Pump
And Back up-to the Left side of the Alternator.
Advise when puting it on:
Put the Belt around everything else accept for the Alternator. After it is around all the rest of the Pulleys - Pull the belt up - tight from the Power steering Pump and the Idle Pulley to form a loop, holding the Belt close to the Altenator Pulley.
Using the 15mm wrench or belt tensioner bar - rotate the Tensioner Pulley towards the front of the Van and then place the belt over the Alternator.
Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!